Best Water Softener for Austin, TX — 14 Things to Know BEFORE You Buy!

Written by Craig "The Water Guy" Phillips

1. The Local Water Problem in Austin, TX

Your Austin home's plumbing system is under assault every single day. At 15.2 grains per gallon (GPG), Austin's water hardness ranks as extremely hard — a classification that puts your home's infrastructure at immediate risk. To understand what this means in practical terms, think of your pipes like arteries in the human body: just as cholesterol builds up in blood vessels over time, calcium and magnesium minerals from Austin's water supply create calcified deposits that narrow pipe walls and choke off water flow.

Austin draws its water primarily from Lake Travis and Lake Austin on the Colorado River, plus the Barton Springs/Edwards Aquifer. These limestone-rich geological formations dissolve calcium carbonate and magnesium into the water supply as it moves through underground caverns and surface reservoirs. The result is water so mineral-dense that it contains more than four times the calcium and magnesium of cities classified as having "soft" water.

At 15.2 GPG, every gallon of Austin water carries 260 milligrams of dissolved rock. For context, anything above 14 GPG is classified as extremely hard water — meaning Austin homeowners are dealing with some of the most challenging residential water conditions in Texas. This isn't just a cosmetic annoyance that leaves spots on your glassware. At this hardness level, mineral deposits form concrete-like scale inside water heaters, coat the interior walls of pipes, and create an annual "hard water tax" that costs Austin households an estimated $1,800 to $2,400 per year in energy waste, excess soap consumption, and premature appliance replacement.

The financial stakes extend beyond monthly utility bills. Austin's extremely hard water can reduce a standard 40-gallon water heater's efficiency by 35-40% within just 18 months of installation. Tankless water heaters — increasingly popular in Austin's energy-conscious market — are even more vulnerable, with manufacturers like Rinnai and Navien explicitly voiding warranties when installed without a water softener in areas exceeding 7 GPG hardness.

2. What 15.2 GPG Does to Your Home

At Austin's 15.2 GPG hardness level, calcium carbonate doesn't just coat your appliances — it forms geological deposits inside them. When water temperatures exceed 140°F, dissolved calcium and magnesium minerals precipitate out of solution and bond to metal surfaces in crystalline structures identical to limestone cave formations. Your water heater's heating elements become encased in these mineral crusts, forcing the system to work exponentially harder to transfer heat through the insulating layer of rock.

A typical Austin water heater loses 8-12% efficiency in the first year, 20-25% by year two, and 35-40% by year three when operating with untreated 15.2 GPG water. For a household spending $150 monthly on water heating, this translates to $18 extra per month in year one, escalating to $60 extra per month by year three. Over a 10-year period, efficiency losses from Austin's extremely hard water can add $3,600 to $4,800 to your energy bills — enough to purchase three high-quality water softeners.

Austin's older neighborhoods face compounded risks due to galvanized steel pipes installed before 1970. At 15.2 GPG, these pipes develop measurable diameter reduction within 5-7 years as calcium deposits form concentric rings along interior walls. The Zilker, Hyde Park, and Travis Heights areas — with housing stock dating to the 1940s and 1950s — see particularly severe pipe constriction that reduces water pressure and creates turbulent flow patterns that accelerate further mineral buildup.

Soap and detergent consumption in Austin households typically runs 2.5 to 4 times higher than the national average due to the calcium-magnesium reaction that prevents proper lathering. Calcium ions bind with soap molecules to form insoluble precipitates — the grey scum ring in your bathtub — rather than the cleansing action soap is designed to provide. An average Austin family of four spends an additional $240 to $380 annually on extra soap, shampoo, detergent, and fabric softener trying to compensate for their water's extreme mineral content.

Austin's 15.2 GPG water strips moisture from skin by forming calcium residue that clogs pores and prevents natural oil production. Dermatologists at Austin Regional Clinic report a measurably higher incidence of eczema, contact dermatitis, and chronic dry skin in patients living in areas with untreated extremely hard water. Hair becomes coated with mineral deposits that make it feel rough, appear dull, and resist styling products. Many Austin residents report needing to wash their hair daily to remove mineral buildup, which paradoxically worsens the drying effect.

Laundry emerges from Austin washing machines with embedded calcium deposits that make fabrics feel stiff and scratchy. White clothing develops a grey tinge as mineral particles become permanently embedded in cotton and linen fibers. Colors fade faster because detergent cannot penetrate the mineral coating to lift soil and refresh dyes. The typical Austin household replaces clothing, towels, and bedding 40-60% more frequently than families living with soft water.

Glass surfaces throughout Austin homes develop permanent etching from mineral deposits that cannot be removed with conventional cleaning products. Dishwashers operating with 15.2 GPG water develop white scale buildup on interior walls and racks within 6-8 months. The heating element and spray arms become clogged with calcium deposits, reducing cleaning performance and ultimately requiring premature replacement of the entire appliance.

The total annual "hard water tax" for an average Austin household dealing with 15.2 GPG water — combining energy waste, soap consumption, appliance depreciation, and clothing replacement — ranges from $1,800 to $2,400 per year. Over a 15-year homeownership period, Austin's extremely hard water costs residents $27,000 to $36,000 in preventable expenses.

3. Austin's Specific Contaminant Profile

Beyond Austin's challenging 15.2 GPG hardness baseline, residents are also contending with chloramine and sediment — each of which interacts with water hardness in its own problematic way. Understanding these interactions is crucial for Austin homeowners because extremely hard water amplifies the negative effects of other contaminants while making them more difficult to remove through conventional filtration.

Chloramine in Austin's Water Supply

Austin Water uses chloramine as its primary disinfectant rather than free chlorine, creating a persistent chemical presence that's far more stable and difficult to remove than traditional chlorination. Chloramine forms when ammonia is added to chlorinated water, creating a disinfectant that doesn't dissipate by letting water sit in an open container or through standard activated carbon filtration that works for chlorine removal.

At Austin's 15.2 GPG hardness level, chloramine interacts with calcium and magnesium deposits to form complex chemical compounds that can accelerate corrosion of metal pipes and fixtures. The combination creates a distinctive "medicinal" or "band-aid" odor that's strongest when water is heated — such as during showers or when running hot water in the kitchen. Many Austin residents report this chemical smell is most noticeable in summer months when water temperatures in distribution lines increase.

Chloramine presents particular challenges for Austin households with fish tanks or aquariums, as it's toxic to aquatic life even at the low concentrations used for disinfection. Unlike chlorine, which can be neutralized by letting water stand for 24 hours, chloramine requires specific chemical treatment or catalytic carbon filtration. Austin pet stores report significantly higher sales of water conditioners compared to cities using traditional chlorine disinfection.

The EPA allows chloramine concentrations up to 4.0 mg/L, and Austin typically maintains levels between 1.5-3.0 mg/L throughout the distribution system. While these levels meet federal safety standards, some Austin residents with chemical sensitivities report skin irritation and respiratory symptoms that worsen when bathing or showering with hot water that releases chloramine vapors. The SoftPro Elite HE water softener alone does not remove chloramine — Austin residents concerned about this disinfectant should consider pairing the softener with a catalytic carbon whole-house filter.

Sediment and Turbidity Issues

Austin's aging water distribution infrastructure, combined with periodic construction and main breaks, introduces particulate matter that becomes more problematic at 15.2 GPG hardness levels. Sediment particles provide nucleation sites where calcium and magnesium can crystallize more rapidly, accelerating scale formation in pipes and appliances throughout Austin homes.

Sediment in Austin water typically consists of pipe scale fragments, construction debris, and occasionally algae blooms from Lake Travis during hot summer months when water temperatures exceed 85°F. The Colorado River's limestone bed contributes naturally occurring calcium carbonate particles that add to turbidity levels, especially during heavy rainfall events that increase surface runoff.

Austin residents in areas with older galvanized pipes — particularly neighborhoods like Tarrytown, Clarksville, and parts of East Austin — experience higher sediment loads as interior pipe corrosion creates iron oxide particles that combine with calcium deposits. This creates a rust-colored sediment that stains fixtures and laundry while accelerating wear on appliance components like washing machine pumps and dishwasher spray arms.

The EPA secondary standard for turbidity is 4.0 NTU (nephelometric turbidity units), and Austin typically maintains levels well below 1.0 NTU at the treatment plant. However, sediment accumulates in distribution lines and can spike during system maintenance or emergency repairs. At 15.2 GPG hardness, even small amounts of sediment create disproportionate problems because mineral-laden water causes particles to adhere to surfaces rather than flowing freely through the system.

The SoftPro Elite HE includes a self-cleaning sediment pre-filter specifically designed to capture particulate matter before it reaches the resin tank, protecting the ion exchange media from fouling and extending system life in challenging conditions like those found throughout Austin. This pre-filtration capability is essential for Austin installations because sediment combined with extremely hard water can damage softener resin and reduce regeneration efficiency.

4. Why Most Austin Homeowners Pick the Wrong Softener

Austin's extreme 15.2 GPG hardness creates a unique challenge that exposes the weaknesses of budget softener systems and reveals why most homeowners end up disappointed with their first purchase. After reviewing hundreds of warranty claims and service calls from Austin-area contractors, four critical mistakes emerge repeatedly.

Mistake 1: Buying on Price Alone

An undersized water softener cannot handle the continuous mineral load that Austin's 15.2 GPG water delivers to your home. Resin exhaustion happens exponentially faster at higher GPG levels — a 24,000-grain unit that works adequately in a soft-water city like Seattle will be overwhelmed by an Austin household's demand within 2-3 days. The result is "breakthrough" where hard water bypasses depleted resin and flows directly to your appliances, providing zero protection during the days between regeneration cycles.

Austin contractors report that approximately 60% of service calls involve homeowners who purchased the smallest available softener to save $200-300 upfront, only to discover their system regenerates daily and still delivers hard water. The false economy of undersizing costs Austin families an average of $1,200-1,800 annually in continued hard water damage while they own an ineffective system.

Mistake 2: Confusing Softeners with Filters

Water softeners use ion exchange resin to remove calcium and magnesium minerals — they do NOT reliably remove chloramine or sediment. Austin residents dealing with both 15.2 GPG hardness and Austin Water's chloramine disinfection need a two-stage approach: softening for mineral removal and specialized filtration for chemical treatment. Many Austin homeowners spend thousands on a softener expecting it to address the medicinal taste and odor from chloramine, then feel deceived when these issues persist.

Sediment creates additional complications because particles can foul softener resin over time, reducing efficiency and requiring more frequent regeneration. The right system for Austin water includes integrated sediment pre-filtration to protect the resin investment, not just basic softening capability.

Mistake 3: Ignoring Grain Capacity Math

Austin's 15.2 GPG creates a daily grain demand that overwhelms most residential softeners within 3-5 days. The formula is straightforward but critical:

4 people × 75 gallons/day × 15.2 GPG = 4,560 grains consumed daily
4,560 grains × 7 days = 31,920 grains weekly demand

A 32,000-grain softener appears adequate mathematically, but optimal performance requires regenerating every 5-7 days with a 20% capacity buffer for high-usage periods. Austin households need 38,000-40,000 grains of working capacity, pointing toward 48,000-grain or 64,000-grain systems for reliable operation.

Mistake 4: Overlooking Salt Efficiency

At Austin's 15.2 GPG hardness level, water softeners regenerate 2-3 times more frequently than in moderate hardness areas. An inefficient system uses 8-15 pounds of salt per regeneration cycle, while high-efficiency models like the SoftPro Elite HE use 4-6 pounds to achieve the same resin cleaning. Over 10 years of Austin operation, this difference compounds to 4,000-8,000 pounds of additional salt — representing $600-1,200 in unnecessary operating costs while creating excess sodium discharge into Austin's wastewater system.

5. The SoftPro Elite HE: Built for Austin's Water

After evaluating Austin's water hardness of 15.2 GPG and the presence of chloramine and sediment in the local supply, one system consistently rises to the top for Austin homeowners: the SoftPro Elite HE Water Softener. This isn't marketing hyperbole — it's the logical conclusion after analyzing Austin's specific water chemistry challenges against available softening technologies.

Salt-Based Ion Exchange for Extreme Hardness

Salt-free systems do not actually remove hardness minerals — they only attempt to change crystal structure through template-assisted crystallization (TAC) media. At Austin's 15.2 GPG hardness level, TAC systems cannot prevent scale formation in water heaters and appliances. Independent testing shows TAC effectiveness drops dramatically above 10 GPG, making these systems unsuitable for Austin's extreme mineral content.

The SoftPro Elite HE uses true cation exchange resin to physically replace calcium and magnesium ions with sodium ions — the only proven method that delivers genuinely soft water (under 1 GPG) regardless of incoming hardness levels. For Austin households dealing with 15.2 GPG water, this complete mineral removal is operationally essential, not just preferred.

Demand-Initiated Regeneration (DIR) Technology

At Austin's extreme hardness level, resin exhausts faster than anywhere else in Texas. Traditional time-clock regeneration systems guess when resin needs cleaning, leading to either hard water breakthrough (under-regeneration) or excessive salt and water waste (over-regeneration). DIR technology monitors actual water usage and resin capacity to regenerate only when the media is truly depleted.

For Austin households consuming 4,500-5,000 grains of capacity daily, DIR prevents the hard water breakthrough that damages appliances while eliminating unnecessary regeneration cycles that waste salt. This adaptive control is particularly crucial in Austin because extremely hard water creates zero margin for error in regeneration timing.

NSF/ANSI Standard 44 Certified Resin

Certification under NSF/ANSI 44 verifies that resin meets strict performance and materials safety standards for sodium ion exchange. For Austin residents already managing chloramine and sediment in their water supply, knowing the softening process itself doesn't introduce additional contaminants is essential for household water quality confidence.

The certification also validates resin durability under high-cycle conditions like those created by Austin's 15.2 GPG hardness. Non-certified resins can break down faster under extreme hardness stress, releasing plastic particles into softened water and requiring premature replacement.

Multiple Grain Capacity Options

Austin households need substantial grain capacity to handle 15.2 GPG water without daily regeneration. The SoftPro Elite HE offers 32,000, 48,000, 64,000, and 80,000-grain configurations, allowing proper sizing for Austin's demanding conditions.

For a typical 4-person Austin household:
Daily demand: 4,560 grains
Weekly demand with 20% buffer: 38,304 grains
Recommended capacity: 48,000 or 64,000 grains for 7-10 day regeneration intervals

The ability to size appropriately for Austin's extreme hardness prevents the undersizing mistakes that plague 60% of local installations.

10-Year Comprehensive Warranty

At 15.2 GPG hardness, softener resin and control valves experience heavy daily stress that accelerates wear compared to moderate hardness installations. SoftPro's 10-year warranty provides Austin homeowners with protection during the period of highest mechanical stress, covering both resin replacement and electronic component failures that occur more frequently under extreme operating conditions.

Most budget softener warranties exclude resin after 2-3 years or void coverage if regeneration frequency exceeds manufacturer recommendations — both common scenarios in Austin installations. The SoftPro warranty acknowledges extreme hardness applications and maintains coverage regardless of regeneration frequency required by local water conditions.

Integrated Sediment Pre-Filtration

Austin's aging distribution infrastructure introduces particulate matter that can foul softener resin and reduce ion exchange efficiency. The SoftPro Elite HE includes a self-cleaning sediment pre-filter that captures particles before they reach the resin tank, protecting the system's core components from Austin's periodic turbidity spikes.

This pre-filtration capability extends resin life and maintains consistent performance in Austin installations where sediment combines with 15.2 GPG hardness to create accelerated fouling conditions. The automated backwash feature prevents filter clogging without requiring manual maintenance or cartridge replacement.

For Austin households dealing with 15.2 GPG of water hardness and the compounding presence of chloramine and sediment, the SoftPro Elite HE is not a comfort upgrade — it is infrastructure protection for your home. The system's design acknowledges Austin's extreme operating conditions and provides the capacity, efficiency, and durability required for reliable long-term operation in one of Texas's most challenging residential water environments.

6. How to Size Your Softener for Austin

Austin's 15.2 GPG hardness requires precise sizing calculations because undersized systems fail rapidly under extreme mineral loads. Follow this step-by-step process to determine the correct grain capacity for your Austin household:

Step 1: Count household members (include regular overnight guests)

Step 2: Multiply by 75 gallons per person per day (Austin average water usage)

Step 3: Multiply household gallons × 15.2 GPG = daily grain demand

Step 4: Multiply by 7 days = weekly grain demand

Step 5: Add 20% buffer for high-usage days (laundry, guests, lawn watering)

Step 6: Match result to SoftPro Elite HE grain capacity (32K/48K/64K/80K)

Example calculation for 4-person Austin household:
Step 1: 4 people
Step 2: 4 × 75 = 300 gallons daily
Step 3: 300 × 15.2 GPG = 4,560 grains daily
Step 4: 4,560 × 7 = 31,920 grains weekly
Step 5: 31,920 × 1.20 = 38,304 grains needed
Step 6: Requires 48,000-grain or 64,000-grain SoftPro Elite HE

The 64,000-grain model provides optimal performance for most Austin households, regenerating every 10-12 days under normal usage while maintaining a safety buffer for high-consumption periods. Regenerating every 5-7 days maximizes resin efficiency and salt economy, but 10-12 day intervals are acceptable and reduce system maintenance in Austin's demanding water conditions.

7. Installation in Austin: What to Know

Austin does not require a licensed plumber for water softener installation, but the city's extremely hard water demands precise placement and configuration for optimal performance. Most Austin homeowners can legally install their own softener, though professional installation is recommended for homes with complex plumbing or limited space constraints.

Install the SoftPro Elite HE after your main water shutoff valve but before the water heater. In Austin installations, this placement ensures all hot water receives softening treatment while maintaining one untreated cold water line to the kitchen sink for drinking water (if preferred). Austin's typical residential water pressure ranges from 45-65 PSI, which suits the SoftPro's operating requirements without additional pressure regulation.

Austin installations require a drain line for regeneration discharge, typically connected to a utility sink, floor drain, or standpipe. The system discharges approximately 50-75 gallons during each regeneration cycle, containing dissolved salt and removed minerals. Austin's municipal code allows softener discharge to the sanitary sewer system but prohibits connection to storm drains or direct ground discharge.

At Austin's 15.2 GPG hardness level, use only evaporated salt pellets — the highest purity option with minimal brine tank residue. Solar salt crystals and rock salt contain impurities that create sludge buildup in the brine tank, reducing regeneration efficiency and requiring more frequent cleaning. Austin water's extreme mineral content leaves no margin for additional impurities from low-grade salt.

Check salt levels monthly in Austin installations due to high consumption rates. A 64,000-grain system operating in Austin's 15.2 GPG water typically uses 200-300 pounds of salt every 6-8 weeks. Maintain salt level at least 6 inches above the water line in the brine tank to ensure proper regeneration concentration.

Austin's hot climate can accelerate salt bridging — a hard crust that forms above the water line and prevents proper salt dissolution. Check for salt bridges monthly by gently probing the salt surface with a broom handle. If the salt feels solid more than 2 inches below the surface, break up the bridge to restore proper regeneration function.

8. Maintenance Schedule for Austin Homeowners

Austin's 15.2 GPG extreme hardness accelerates normal wear patterns and requires more frequent maintenance than moderate hardness installations. Follow this Austin-specific schedule to maximize system performance and longevity:

Monthly Tasks

Check salt level and consumption rate. At 15.2 GPG hardness, salt consumption is high — typically 25-40 pounds monthly depending on household size and regeneration frequency. Maintain salt level 6-8 inches above the water line for optimal brine concentration.

Inspect for salt bridges by probing the salt surface. Austin's temperature fluctuations between air-conditioned interiors and 100°F+ summer heat can cause salt crystallization that blocks regeneration water flow. Break up any hard crusts immediately.

Confirm bypass valve remains in service position. Accidentally switching to bypass mode in Austin means 15.2 GPG water flows directly to appliances, causing rapid scale buildup and potential warranty voiding on water heaters.

Every 3 Months

Clean the brine tank to remove accumulated sediment and salt residue. Austin's high regeneration frequency creates more mineral precipitation in the brine tank compared to moderate hardness installations. Remove undissolved salt, vacuum the tank bottom, and rinse with clean water.

Test post-softener water hardness using test strips or digital meter. Softened water should measure under 1 GPG consistently. If hardness creeps above 1 GPG, resin may need cleaning or the system requires regeneration adjustment for Austin's demanding conditions.

Inspect sediment pre-filter performance. Austin's distribution system periodically introduces particles that can reduce flow rate and pressure. The SoftPro's self-cleaning pre-filter handles most sediment automatically, but verify no unusual accumulation exists.

Annual Maintenance

Complete brine tank cleaning and sanitization. Drain the tank completely, scrub interior surfaces, and refill with fresh salt. Austin's high-cycle operation can promote bacterial growth in standing brine, making annual sanitization essential for water quality.

Conduct resin bed performance evaluation. At 15.2 GPG hardness, resin experiences heavy ion exchange stress that can reduce capacity over time. If post-softener hardness exceeds 1 GPG despite proper regeneration, consider resin cleaning treatment or capacity testing.

Verify regeneration cycle timing and salt dosage remain optimal. Austin water conditions may require regeneration adjustments as resin ages or household usage patterns change. Confirm the system regenerates based on actual consumption rather than arbitrary time intervals.

Every 5 Years

Evaluate resin replacement needs based on output water quality and regeneration efficiency. Austin's extreme hardness degrades resin faster than moderate hardness cities — expect 10-15 year resin life compared to 20+ years in soft water areas. Declining performance or increased salt consumption indicates resin aging.

Austin residents should establish baseline hardness measurements before installation and retest quarterly during the first year to confirm optimal system performance. Document regeneration frequency and salt consumption to identify gradual changes that indicate maintenance needs or component wear.

9. Is Austin's 15.2 GPG Water Dangerous to Drink?

Austin's extremely hard water at 15.2 GPG meets all EPA safety standards and poses no acute health risks from mineral content alone. Calcium and magnesium are essential nutrients, and the World Health Organization notes that hard water can contribute to daily mineral intake. However, the high mineral concentration creates practical problems that affect quality of life and household economics rather than immediate health concerns.

10. Will a Water Softener Remove Chloramine from Austin Water?

No, the SoftPro Elite HE water softener alone does not remove chloramine disinfectant from Austin's water supply. Water softeners use ion exchange resin to remove calcium and magnesium minerals — chloramine requires catalytic carbon filtration or other specialized treatment methods. Austin residents concerned about chloramine's taste, odor, or chemical sensitivity effects should pair the softener with a whole-house catalytic carbon filter.

11. How Much Salt Will I Use Monthly in Austin at 15.2 GPG?

A typical 4-person Austin household with a properly sized softener uses 25-40 pounds of salt monthly due to the extreme 15.2 GPG hardness level. Exact consumption depends on water usage, regeneration efficiency, and household size. Budget $15-25 monthly for evaporated salt pellets — the only salt grade recommended for Austin's challenging water conditions.

12. Does Austin Require a Permit to Install a Water Softener?

Austin does not require permits for standard residential water softener installations. However, if installation involves new plumbing lines, electrical connections, or modifications to the main water service, Austin Development Services may require permits. Most homeowner installations connecting to existing plumbing after the water meter proceed without city approval.

13. Why Does Soft Water Feel Slippery in Austin Showers?

After years of bathing in Austin's 15.2 GPG hard water, your skin has adapted to calcium residue that prevents soap from rinsing completely. Soft water allows soap to lather properly and rinse away cleanly, creating a slippery sensation that indicates effective cleansing rather than soap buildup. Most Austin residents adjust to this feeling within 2-3 weeks and report significantly improved skin and hair condition.

14. Can the SoftPro Elite HE Handle Austin's Water Without Additional Filtration?

The SoftPro Elite HE effectively addresses Austin's 15.2 GPG hardness and includes sediment pre-filtration for particle removal. However, Austin's chloramine disinfectant requires separate treatment if taste, odor, or chemical sensitivity are concerns. The softener provides complete hardness removal and appliance protection — additional filtration depends on individual preferences for chloramine treatment rather than system limitations.

Final Verdict for Austin

Austin's extreme water hardness of 15.2 GPG demands professional-grade treatment that matches the severity of the mineral challenge. This isn't a situation where "any softener will help" — Austin's water conditions require the specific capacity, efficiency, and durability that the SoftPro Elite HE provides through its demand-initiated regeneration, high-capacity resin, and integrated sediment pre-filtration.

Chloramine and sediment compound Austin's hardness problem by creating additional chemical treatment needs and accelerated resin fouling conditions. The SoftPro Elite HE addresses the core hardness and sediment issues directly while maintaining compatibility with supplemental chloramine filtration for residents who choose comprehensive water treatment.

The system's 64,000-grain capacity handles Austin's demanding 4,500+ grains daily consumption while regenerating every 10-12 days for optimal salt efficiency and resin longevity. For Austin homeowners facing $1,800-2,400 annual hard water costs, the SoftPro Elite HE pays for itself within 2-3 years through energy savings, reduced soap consumption, and appliance protection alone.

Check current SoftPro Elite HE pricing and available grain capacities for Austin households at authorized dealers throughout the metropolitan area. Like the bats emerging from Congress Avenue Bridge each evening, Austin's extremely hard water follows a predictable pattern — but unlike our famous bat colony, your home's mineral deposits aren't a tourist attraction worth preserving.