Best Water Softener for Frisco, TX — 17 Things to Know BEFORE You Buy!

Written by Craig "The Water Guy" Phillips

1. The Local Water Problem in Frisco, TX

Every day in Frisco, homeowners watch their 40-gallon water heaters lose efficiency like a slow-motion financial catastrophe. At 12.8 grains per gallon (GPG), Frisco's water hardness isn't just a minor inconvenience — it's classified as extremely hard water that systematically destroys home infrastructure. Think of water hardness like compound interest in reverse: instead of money growing in your favor, mineral deposits accumulate daily inside your pipes, appliances, and fixtures, steadily eroding their value and performance.

Frisco's water originates primarily from Lake Lewisville and the Trinity River system, both of which flow through limestone and chalk formations that saturate the water with calcium and magnesium minerals. When water contains 12.8 GPG, it means every gallon carries 12.8 grains of dissolved rock — equivalent to about 219 milligrams per liter of pure mineral content. For perspective, anything above 10.5 GPG is considered very hard; at 12.8 GPG, Frisco residents are dealing with extremely hard water that ranks among the most challenging in North Texas.

The financial stakes are immediate and measurable. At 12.8 GPG hardness, a typical Frisco household loses approximately $1,200 annually to hard water damage. This "hard water tax" includes premature appliance replacement, doubled soap and detergent costs, increased energy bills from scale-clogged water heaters, and accelerated wear on clothing and linens. For a $400,000 Frisco home — the current median — unmanaged hard water can reduce property value and increase maintenance costs by $15,000 over a 10-year period.

The urgency isn't theoretical for Frisco families. At this extreme hardness level, scale forms visible deposits within months, not years. Tankless water heater manufacturers void warranties without a softener when hardness exceeds 7 GPG — Frisco's 12.8 GPG nearly doubles that threshold. The question isn't whether hard water will damage your home, but how quickly and how expensively.

2. What 12.8 GPG Does to Your Home

At 12.8 GPG, calcium carbonate doesn't just coat your water heater elements — it builds fortress-like barriers that choke efficiency within months. Every time your water heater fires up, dissolved calcium and magnesium crystallize on heating surfaces. In Frisco's extremely hard water, this process accelerates dramatically. A 40-gallon electric water heater operating at 12.8 GPG can lose 35-40% efficiency within 18-24 months, translating to an extra $300-400 annually in electricity costs.

The scale formation process works like geological sediment layers in fast-forward. When water reaches 140°F inside your tank, calcium carbonate precipitates out of solution and bonds to metal surfaces. At 12.8 GPG, this happens so rapidly that heating elements develop thick, chalky coats that insulate them from the water they're trying to heat. The element works harder, runs longer, and ultimately burns out faster — often requiring replacement every 2-3 years instead of the normal 8-10 years.

Frisco's older neighborhoods, particularly those with galvanized steel pipes installed before 1980, face compounded problems. At 12.8 GPG, mineral deposits don't just coat pipe walls — they form concentric rings that progressively narrow the interior diameter. A 3/4-inch supply line can lose 20-30% of its flow capacity within 5-7 years. This creates a cascading effect: reduced water pressure forces pumps and fixtures to work harder, accelerating their wear and creating weak points where leaks develop.

Appliance manufacturers design their products assuming moderately hard water — around 3-7 GPG. At Frisco's 12.8 GPG, appliances operate far outside their intended parameters. Dishwashers develop white film on interior surfaces that becomes permanent etching. Washing machines accumulate mineral buildup in pumps and valves, leading to premature failure. Coffee makers, ice makers, and steam appliances clog with alarming frequency.

The soap scum equation becomes financially punishing at 12.8 GPG. Calcium and magnesium ions react with soap molecules to form insoluble precipitates — gray, sticky scum instead of cleansing lather. Frisco households typically use 3-4 times more laundry detergent, dish soap, and shampoo compared to soft-water areas. For a family of four, this translates to an extra $400-600 annually in cleaning products alone.

Personal care impacts escalate proportionally with hardness levels. At 12.8 GPG, calcium ions strip natural oils from skin and form microscopic mineral deposits on hair shafts. Residents often report persistent dry skin, dull hair, and increased sensitivity to soaps and lotions. Children with eczema or sensitive skin conditions experience measurably worse symptoms in extremely hard water areas like Frisco.

Laundry becomes a losing battle against mineral accumulation. At 12.8 GPG, calcium and magnesium embed in fabric fibers, making clothes feel stiff, look gray, and wear out 40-50% faster. White clothing develops a permanent dingy appearance that no amount of bleach can reverse. The mineral deposits act like microscopic sandpaper, abrading fibers with every wash and dry cycle.

For a typical Frisco household, the combined "hard water tax" at 12.8 GPG totals approximately $1,200 annually: $350 in extra energy costs, $500 in cleaning products and personal care items, $200 in premature clothing replacement, and $150 in accelerated appliance repairs and maintenance.

3. Frisco's Specific Contaminant Profile

Frisco's water profile presents a layered challenge: beyond the 12.8 GPG hardness baseline, residents are also contending with chlorine, iron, and sediment — each of which interacts with water hardness in its own way.

Chlorine in Frisco's Water Supply

Chlorine enters Frisco's water system intentionally as a disinfectant, added at treatment plants to eliminate bacteria and viruses during distribution. The North Texas Municipal Water District, which supplies Frisco, typically maintains chlorine residuals between 1.0-4.0 mg/L to ensure safe delivery to homes. However, chlorine's interaction with 12.8 GPG hardness creates compounded problems that soft-water cities don't experience.

At extreme hardness levels, chlorine accelerates the corrosion of rubber seals and gaskets in appliances and plumbing fixtures. The combination of chlorine's oxidizing properties and calcium scale creates an environment where rubber components degrade 2-3 times faster than normal. Frisco residents often notice stronger chlorine taste and odor during summer months when treatment plants increase dosing to combat higher bacterial loads in warmer source water.

The EPA's maximum residual disinfectant level for chlorine is 4.0 mg/L, and Frisco's levels typically remain well below this threshold. However, even at safe concentrations, chlorine can react with organic matter to form disinfection byproducts like trihalomethanes (THMs) and haloacetic acids (HAAs). The SoftPro Elite HE softener alone does not remove chlorine — Frisco residents seeking chlorine reduction should consider an activated carbon whole-house filter paired with their softener.

Iron in Frisco's Water Supply

Iron appears in Frisco's water supply both naturally from geological sources and through corrosion of aging iron distribution pipes. The Trinity River system and local groundwater sources contain naturally occurring ferrous iron (dissolved and invisible when cold) that oxidizes into ferric iron (visible red-orange particles) when exposed to air or heated.

At 12.8 GPG hardness, iron creates particularly stubborn problems. Iron ions bond chemically with calcium carbonate deposits, creating rust-colored scale that permanently stains fixtures, appliances, and laundry. Once iron and calcium combine in scale deposits, standard cleaning products cannot remove the discoloration. Dishwashers and washing machines develop orange-brown stains on interior surfaces that worsen over time.

The EPA's secondary maximum contaminant level for iron is 0.3 mg/L — a threshold based on taste, odor, and staining rather than health concerns. When iron levels exceed 0.3 mg/L, the mineral can foul water softener resin, reducing the system's effectiveness and requiring more frequent regeneration cycles. For Frisco homes with elevated iron levels, an iron-specific pre-filter upstream of the SoftPro Elite HE is recommended to protect the resin and maintain optimal performance.

Sediment in Frisco's Water Supply

Sediment in Frisco's water originates from aging distribution infrastructure, periodic main breaks, and seasonal turbidity events in Lake Lewisville. The North Texas region's clay soil becomes particularly problematic during heavy rain events, when runoff increases turbidity in source water. Additionally, Frisco's rapid growth has strained older pipe networks, leading to more frequent disturbances that release iron particles and pipe scale.

Sediment interacts destructively with 12.8 GPG hardness by providing nucleation sites where calcium and magnesium crystals can form and grow. Even small amounts of suspended particles accelerate scale formation inside water heaters and appliances. The particles act like seeds, encouraging mineral deposits to build up faster and more extensively than they would in particle-free hard water.

The EPA regulates turbidity as an indicator of filtration effectiveness, with most systems required to maintain levels below 1.0 NTU (nephelometric turbidity units). The SoftPro Elite HE includes a self-cleaning sediment pre-filter specifically designed to capture particles before they reach the resin tank — a critical feature for protecting system performance in areas where both sediment and extreme hardness are present. This pre-filter extends resin life and maintains consistent softening performance even when Frisco's water experiences periodic turbidity events.

4. Why Most Frisco Homeowners Pick the Wrong Softener

Walking through big-box stores in Frisco, homeowners consistently make the same expensive mistake: choosing water softeners based on sale prices rather than grain capacity math. At 12.8 GPG, this decision costs thousands in premature system failure and continued hard water damage. The marketing displays showcase "whole-house water softeners" for $400-800, but these units typically offer 24,000-32,000 grain capacity — adequate for soft-water cities but completely inadequate for Frisco's extreme hardness.

The capacity shortfall becomes catastrophic within weeks. A 24,000-grain system serving a four-person Frisco household at 12.8 GPG exhausts its resin every 2-3 days instead of the intended 7-10 days. Constant regeneration wastes salt and water while still allowing hard water breakthrough during peak usage periods. Homeowners notice soap scum returning, spots on dishes, and scale formation continuing despite having "installed a water softener."

Mistake number two involves confusing water softeners with water filters. Frisco residents dealing with chlorine taste, iron staining, and sediment often assume a single "water treatment system" will address everything. Water softeners use ion exchange resin to remove calcium and magnesium exclusively. They do not reliably remove chlorine, iron, or sediment from Frisco's water supply. Residents with both 12.8 GPG hardness and these additional contaminants need a properly sequenced multi-stage approach: sediment pre-filtration, iron removal if needed, water softening, and carbon post-filtration for chlorine.

The third mistake involves ignoring grain capacity mathematics entirely. Proper sizing requires calculating daily grain demand: household members × 75 gallons per person × 12.8 GPG hardness. For a four-person Frisco family, this equals 3,840 grains daily. Multiplied by seven days, weekly demand reaches 26,880 grains. Adding a 20% buffer for high-usage periods brings total capacity needs to approximately 32,000 grains minimum — and that assumes regeneration every seven days exactly.

The final mistake centers on salt efficiency ignorance. At 12.8 GPG, softeners regenerate frequently, making salt consumption a significant ongoing expense. Inefficient units use 8-15 pounds of salt per regeneration cycle, while high-efficiency systems like the SoftPro Elite HE use 6-8 pounds for the same grain capacity. Over ten years in Frisco, this difference compounds to 2,000-4,000 pounds of salt — representing $400-800 in additional operating costs beyond the initial purchase price difference.

5. The SoftPro Elite HE: Built for Frisco's Water

After evaluating Frisco's water hardness of 12.8 GPG and the presence of chlorine, iron, and sediment in the local supply, one system consistently rises to the top for Frisco homeowners: the SoftPro Elite HE Water Softener.

The foundation of effective water softening lies in proven ion exchange technology, and this becomes critically important at Frisco's extreme hardness levels. Salt-free systems marketed as "water conditioners" do not actually remove hardness minerals — they only attempt to change crystal structure through template-assisted crystallization. At 12.8 GPG, salt-free technology cannot prevent scale formation. The SoftPro Elite HE uses true cation exchange resin to physically replace calcium and magnesium ions with sodium ions — the only method that delivers genuinely soft water at this hardness level.

Demand-initiated regeneration (DIR) separates professional-grade systems from consumer units, especially in extreme hardness areas like Frisco. At 12.8 GPG, resin exhausts faster than in moderate hardness cities. Timer-based systems regenerate on fixed schedules regardless of actual usage, leading to either hard water breakthrough (under-regeneration) or salt and water waste (over-regeneration). The SoftPro's DIR technology monitors actual resin capacity and initiates regeneration only when depletion occurs — preventing hard water breakthrough while maximizing salt efficiency.

NSF/ANSI Standard 44 certification provides third-party verification that the resin meets strict performance and materials safety standards. For Frisco residents already managing chlorine, iron, and sediment in their water supply, knowing the softening process itself doesn't introduce additional contaminants is essential. The certification process tests resin durability under high-cycle conditions that mirror the frequent regeneration required at 12.8 GPG hardness levels.

Grain capacity options (32,000, 48,000, 64,000, and 80,000 grains) allow precise sizing for Frisco households. Using the proper formula for a four-person family: 4 people × 75 gallons × 12.8 GPG = 3,840 grains daily. Weekly demand totals 26,880 grains, requiring a minimum 32,000-grain capacity for weekly regeneration. However, the 48,000-grain model provides optimal efficiency by allowing 8-10 day regeneration cycles while maintaining a safety buffer for high-usage periods.

The 10-year warranty provides Frisco homeowners with protection during the years of highest hardness stress. At 12.8 GPG, resin sees heavy daily mineral loading that accelerates wear compared to moderate hardness applications. Components like control valves, motors, and seals face continuous operation under challenging conditions. A decade-long warranty demonstrates manufacturer confidence in the system's ability to handle extreme hardness without premature failure.

Pre-filtration compatibility addresses Frisco's multi-contaminant profile systematically. The SoftPro Elite HE is specifically designed to work downstream of iron and sediment pre-filters — preventing resin fouling that would otherwise shorten system service life. The included self-cleaning sediment pre-filter captures particles before they reach the resin tank, while maintaining compatibility with upstream iron removal systems when iron levels exceed the 0.3 mg/L threshold.

Salt efficiency becomes financially significant at Frisco's 12.8 GPG consumption rate. The SoftPro Elite HE's high-efficiency regeneration cycle uses 6-8 pounds of salt per regeneration compared to 10-15 pounds for standard units. With regeneration occurring every 8-10 days at this hardness level, annual salt consumption totals approximately 200-250 pounds versus 400-500 pounds for inefficient systems. Over the system's 10-year lifespan, this represents $600-1,000 in salt cost savings.

For Frisco households dealing with 12.8 GPG of water hardness and the compounding presence of chlorine, iron, and sediment, the SoftPro Elite HE is not a comfort upgrade — it is infrastructure protection for your home.

6. How to Size Your Softener for Frisco

Proper softener sizing for Frisco's 12.8 GPG water requires precise calculation, not guesswork. Undersized systems fail within weeks at this extreme hardness level, while oversized units waste salt and water during every regeneration cycle.

Step 1: Count household members accurately. Include full-time residents only — overnight guests don't impact long-term sizing calculations.

Step 2: Multiply by 75 gallons per person per day. This EPA average accounts for drinking, cooking, bathing, laundry, and dishwashing.

Step 3: Multiply household gallons × 12.8 GPG = daily grain demand. This calculation determines how many grains of hardness minerals your softener must remove every 24 hours.

Step 4: Multiply daily grain demand × 7 = weekly grain demand. Weekly calculations provide the most practical regeneration scheduling.

Step 5: Add 20% buffer for high-usage days. Holidays, house guests, and seasonal variations can spike consumption temporarily.

Step 6: Match your total to SoftPro Elite HE grain capacity tiers: 32K / 48K / 64K / 80K.

Example calculation for a four-person Frisco household:

4 people × 75 gallons = 300 gallons daily
300 gallons × 12.8 GPG = 3,840 grains daily
3,840 grains × 7 days = 26,880 grains weekly
26,880 grains × 1.20 buffer = 32,256 grains needed

Recommendation: 48,000-grain SoftPro Elite HE for optimal efficiency. While the 32,000-grain model meets minimum requirements, the 48,000-grain capacity allows 8-10 day regeneration cycles, reducing salt consumption and extending resin life. This sizing regenerates approximately twice weekly under normal usage — ideal for maintaining consistent soft water at 12.8 GPG hardness levels.

7. Installation in Frisco: What to Know

Frisco does not require licensed plumber installation for residential water softeners, but professional installation ensures optimal performance at 12.8 GPG hardness levels. DIY installation is legal but challenging for homeowners unfamiliar with plumbing modifications and electrical connections.

Placement location is critical for system performance and maintenance access. Install the softener after the main water shutoff valve but before the water heater — this ensures all heated water receives treatment while maintaining untreated water for outdoor irrigation. Most Frisco homes have adequate garage or utility room space for the SoftPro Elite HE, which requires approximately 18 inches of clearance on all sides for salt loading and maintenance access.

Drain line requirements differ from standard plumbing because regeneration discharge contains elevated sodium levels. The drain line must connect to a laundry tub, utility sink, or floor drain — never directly to septic systems or landscaping. Frisco's clay soil and municipal sewer connections accommodate brine discharge without environmental concerns.

Municipal water pressure in Frisco typically ranges from 40-80 PSI, which suits the SoftPro Elite HE's operating requirements perfectly. The system functions optimally between 25-80 PSI and includes internal flow controls that maintain consistent performance across this range. Homes with pressure above 80 PSI should install a pressure-reducing valve to protect all plumbing components, not just the softener.

Salt type selection impacts system performance and maintenance frequency at 12.8 GPG consumption levels. Evaporated pellets provide the highest purity and lowest brine tank residue — essential for extreme hardness applications. Solar crystals cost less but leave more residue requiring frequent brine tank cleaning. Diamond crystal evaporated pellets or Morton System Saver pellets are optimal choices for Frisco installations.

At 12.8 GPG regeneration frequency, check salt levels every 2-3 weeks rather than monthly. Maintain salt levels 2-3 inches above the water line in the brine tank. Allow new installations to complete 2-3 regeneration cycles before establishing regular monitoring schedules.

8. Maintenance Schedule for Frisco Homeowners

Frisco's 12.8 GPG hardness accelerates maintenance requirements compared to moderate hardness areas. Proactive maintenance prevents expensive repairs and ensures consistent soft water delivery.

Monthly maintenance (every 30 days):

Check salt level consumption, which is high at 12.8 GPG regeneration frequency. Expect 15-20 pounds monthly consumption for a four-person household — significantly higher than moderate hardness areas. Inspect for salt bridges, which form when humidity causes salt to crust above the water line, blocking proper brine formation. Check that the bypass valve remains in the service position — accidentally switching to bypass eliminates all softening.

Quarterly maintenance (every 90 days):

Clean the brine tank interior to remove accumulated sediment and salt residue. Test post-softener water hardness using test strips — readings should remain under 1 GPG consistently. At 12.8 GPG input hardness, any reading above 1 GPG indicates resin exhaustion, fouling, or system malfunction requiring immediate attention. Inspect and clean the sediment pre-filter, which captures particles that would otherwise damage resin beads.

Annual maintenance (every 12 months):

Perform complete brine tank cleaning with disinfection using unscented bleach solution. Conduct comprehensive resin bed performance evaluation — if post-softener hardness creeps above 1 GPG despite proper salt levels, resin may need iron fouling treatment or replacement. Check resin for orange discoloration indicating iron fouling, which requires resin cleaner treatment. Audit regeneration cycle timing and salt dosage to ensure optimal efficiency at current usage levels.

Five-year maintenance evaluation:

Assess resin replacement needs based on output water quality and regeneration efficiency. At 12.8 GPG loading, resin degrades faster than in moderate hardness applications — expect 8-12 year resin life versus 15-20 years in soft water areas. Professional resin quality testing determines whether cleaning or replacement provides better long-term value.

Frisco residents should establish baseline hardness readings before installation and retest 30 days afterward to confirm optimal system performance at 12.8 GPG input conditions.

9. Is Frisco's water at 12.8 GPG dangerous to drink?

Frisco's 12.8 GPG hardness poses no direct health risks — calcium and magnesium are essential minerals that many people supplement deliberately. The EPA doesn't regulate hardness as a health contaminant because hard water consumption may actually provide beneficial minerals. Some studies suggest hard water areas have lower cardiovascular disease rates, though the correlation isn't definitively proven.

The danger lies in infrastructure damage, not drinking water safety. At 12.8 GPG, the minerals systematically destroy appliances, reduce energy efficiency, and create costly maintenance problems. Softening removes these minerals from household water while residents can obtain calcium and magnesium through food sources or supplements if desired.

10. Will a water softener remove chlorine, iron, and sediment from Frisco's water?

Water softeners remove calcium and magnesium exclusively through ion exchange — they do not reliably remove chlorine, iron, or sediment. This is crucial for Frisco residents to understand before installation.

Chlorine requires activated carbon filtration for effective removal. Iron above 0.3 mg/L can foul softener resin and needs pre-treatment with specialized iron filters. Sediment removal requires mechanical filtration, though the SoftPro Elite HE includes a sediment pre-filter to protect the resin. For comprehensive treatment of Frisco's multi-contaminant profile, consider a whole-house system with pre-filtration, softening, and carbon post-filtration stages.

11. How much salt will I use per month in Frisco at 12.8 GPG?

A four-person Frisco household typically consumes 15-20 pounds of salt monthly at 12.8 GPG hardness levels. This assumes the properly sized 48,000-grain SoftPro Elite HE regenerating every 8-10 days using 6-8 pounds per cycle.

Annual salt costs total approximately $60-80 using high-quality evaporated pellets. Inefficient softeners can double or triple this consumption, making salt efficiency a critical selection factor. Budget $75-100 annually for salt plus quarterly brine tank cleaning supplies.

12. Does Frisco require a permit to install a water softener?

Frisco does not require permits for standard residential water softener installation when no new plumbing connections are added. The installation typically involves splicing into existing cold water supply lines, which falls under homeowner maintenance rather than major plumbing modification.

However, if installation requires new electrical circuits, drain connections, or significant plumbing changes, permits may apply. Professional installers handle permit requirements automatically when needed. Contact Frisco's Development Services Department at 972-292-5000 for specific permit questions regarding your installation circumstances.

13. Why does soft water feel slippery in the shower?

Soft water feels slippery because it allows soap to work as chemically intended — creating smooth, lubricating lather instead of sticky scum. In Frisco's 12.8 GPG hard water, calcium ions react with soap to form insoluble precipitates that cling to skin and hair. Soft water eliminates this reaction, allowing soap molecules to rinse cleanly.

The "slippery" sensation is actually soap residue washing away completely rather than forming scum deposits. Most Frisco residents adjust within 1-2 weeks and notice improved skin softness and hair manageability. Use 25-50% less soap and shampoo to avoid over-sudsing during the adjustment period.

14. How quickly will I see results after installing a softener in Frisco?

At 12.8 GPG hardness, results appear within 24-48 hours of proper installation. Immediate changes include soap lathering better, dishes drying spot-free, and shower surfaces feeling less filmy. Existing scale deposits require weeks or months to dissolve gradually through soft water contact.

Appliance efficiency improvements develop over 30-90 days as scale loosens from heating elements. Skin and hair improvements typically become noticeable within one week of consistent soft water use. Laundry softness and brightness improvements appear after 2-3 wash cycles as mineral deposits rinse from fabric fibers.

15. Can the SoftPro Elite HE handle Frisco's water without separate filters?

The SoftPro Elite HE effectively manages 12.8 GPG hardness and includes sediment pre-filtration, but chlorine and elevated iron levels require additional treatment. The included sediment filter protects against particles that could damage resin, while the ion exchange process handles calcium and magnesium completely.

For chlorine taste and odor removal, add a whole-house carbon filter downstream of the softener. If iron levels exceed 0.3 mg/L, install an iron-specific filter upstream to prevent resin fouling. The SoftPro's modular design accommodates these additions without system modifications.

16. What financing options exist for Frisco residents?

Most water treatment dealers serving Frisco offer 12-48 month financing plans with approved credit. Monthly payments typically range from $75-150 depending on system size and term length. Some dealers provide same-as-cash promotional financing for 6-12 months.

Home equity lines of credit often provide lower interest rates for water treatment improvements. Consider the annual $1,200 hard water damage cost when evaluating financing — the system pays for itself through damage prevention and efficiency gains. Many Frisco homeowners finance the initial cost and use hard water savings to accelerate payoff.

17. Final Verdict for Frisco

Frisco's extreme hardness of 12.8 GPG demands professional-grade treatment, not consumer compromises. The combination of calcium and magnesium minerals at this concentration level systematically destroys home infrastructure, wastes energy, and creates ongoing maintenance expenses that compound annually. Chlorine, iron, and sediment in Frisco's water supply amplify these problems through accelerated corrosion, staining, and resin fouling.

The SoftPro Elite HE emerges as the optimal solution because its demand-initiated regeneration prevents hard water breakthrough during peak usage, its high grain capacity options (32K-80K) properly match Frisco's consumption requirements, and its NSF-certified resin handles extreme mineral loading without premature degradation. The 10-year warranty provides confidence that the system will perform throughout the decade when hard water damage costs peak.

For Frisco homeowners, water softening isn't about luxury or convenience — it's about protecting a substantial investment in home infrastructure. The annual hard water tax of $1,200 compounds over time, while appliance replacements, energy waste, and maintenance problems accelerate without treatment. The SoftPro Elite HE represents a strategic investment that pays dividends through damage prevention, efficiency restoration, and quality of life improvements.

Check current SoftPro Elite HE pricing and available grain capacities to match your household's specific consumption at 12.8 GPG hardness levels. Like the Dallas Cowboys' commitment to excellence at The Star just down the road, Frisco residents deserve water treatment that performs at championship levels.