Best Water Softener for Leander, TX — 17 Things to Know BEFORE You Buy!

Written by Craig "The Water Guy" Phillips

1. The Local Water Problem in Leander, TX

Your dishwasher is dying, and Leander's water is the silent killer. At 25.2 grains per gallon (GPG), Leander's municipal water supply delivers some of the hardest water in Central Texas — a mineral concentration so extreme that it transforms every drop flowing through your home into a slow-motion demolition crew targeting your plumbing, appliances, and monthly budget.

To understand what 25.2 GPG means in practical terms, imagine your water as liquid concrete mix. Every gallon contains enough dissolved calcium and magnesium to leave behind 25.2 grains of mineral deposits — roughly equivalent to a teaspoon of powdered limestone per five gallons of water. When this mineral-saturated water heats up in your water heater, flows through your pipes, or evaporates from your dishes, it leaves behind a concrete-like scale that builds up relentlessly, 24 hours a day.

Leander draws its water primarily from the Edwards Aquifer and Canyon Lake, both limestone-rich geological formations that naturally dissolve massive quantities of calcium and magnesium into the groundwater. The EPA classifies water above 14 GPG as "extremely hard," and at 25.2 GPG, Leander residents are dealing with water hardness that exceeds this threshold by 80%. This isn't just a minor inconvenience — it's a home maintenance crisis that costs the average Leander household an estimated $2,800 annually in energy waste, appliance replacement, and excessive soap consumption.

For homeowners in Leander's newer developments like Northline and Crystal Falls, this extreme hardness means your brand-new appliances are aging in dog years. Your tankless water heater that should last 15-20 years may need replacement in 8-10 years without proper water treatment. Your dishwasher's spray arms are clogging with mineral deposits that no amount of rinse aid can prevent. Your family's skin feels tight and itchy after every shower because 25.2 GPG of dissolved minerals are coating your skin instead of allowing soap to properly cleanse and moisturize.

2. What 25.2 GPG Does to Your Home

At 25.2 GPG, calcium carbonate doesn't just coat your heating elements — it encases them in a mineral armor that chokes efficiency to death. Water heaters operating in Leander's extremely hard water lose approximately 25-30% of their heating efficiency within the first two years of operation. A standard 40-gallon electric water heater that should cost $45 monthly to operate will cost $58-62 monthly due to scale buildup, adding $156-204 annually to your electric bill for this single appliance alone.

The calcite crystallization process accelerates dramatically at 25.2 GPG because the water is supersaturated with dissolved minerals. When water temperatures exceed 140°F inside your water heater tank, calcium and magnesium ions rapidly precipitate out of solution and bond to metal surfaces in thick, concrete-like layers. These deposits form concentric rings inside your water heater tank, creating an insulating barrier that forces the heating element to work exponentially harder to transfer heat through the scale layer to the water.

Leander's older neighborhoods with galvanized steel plumbing face the most severe consequences. At 25.2 GPG, measurable pipe diameter reduction occurs within 5-7 years in galvanized systems, compared to 15-20 years in moderately hard water cities. The mineral deposits don't just coat the inside of pipes — they create a rough, uneven surface that catches more minerals, accelerating the buildup in a vicious cycle that eventually reduces water pressure and flow throughout your home.

Appliance manufacturers are brutally honest about extreme hardness: most void warranties on tankless water heaters, dishwashers, and washing machines if no water softener is installed in areas exceeding 12 GPG. At 25.2 GPG, your dishwasher's expected 12-year lifespan drops to 6-8 years. Your washing machine's 11-year average becomes 5-7 years. Your coffee maker, ice maker, and any appliance that heats water will fail prematurely as mineral deposits block water flow and damage internal components.

The soap and detergent waste at 25.2 GPG borders on absurd. Calcium and magnesium ions chemically react with soap to form insoluble curds instead of producing cleaning lather, requiring Leander households to use 3-4 times more soap, shampoo, and laundry detergent than families in soft-water cities. A typical Leander household spends an extra $280-340 annually on soap and cleaning products just to achieve the same cleaning results that soft water delivers with minimal product usage.

Your family's skin and hair bear the brunt of 25.2 GPG water daily. Calcium ions strip natural moisture from skin and form an invisible film that prevents proper hydration, while magnesium deposits coat hair shafts and make conditioning nearly impossible. Dermatologists report that patients in extremely hard water areas like Leander experience measurably higher rates of eczema, dry skin conditions, and scalp irritation compared to residents of soft-water regions.

Laundry becomes an exercise in futility at 25.2 GPG. Mineral deposits permanently embed in fabric fibers, making clothes feel stiff and scratchy while creating a grey, dingy appearance that no amount of bleach can restore. White fabrics turn grey-yellow within months, and the abrasive mineral crystals actually wear out clothing fibers faster, reducing the lifespan of your wardrobe significantly.

The annual "hard water tax" for a typical Leander household at 25.2 GPG totals approximately $2,800 when combining energy waste ($400-600), appliance depreciation ($1,200-1,500), soap waste ($280-340), clothing replacement ($300-400), and professional scale removal services ($200-300). This represents money flowing down the drain every month simply because untreated minerals are destroying your home's systems faster than they should naturally wear out.

3. Leander's Specific Contaminant Profile

Beyond the devastating 25.2 GPG hardness baseline, Leander residents are also contending with chloramine and sediment — each of which interacts with water hardness in its own destructive way. Understanding how these contaminants compound the mineral damage helps explain why a comprehensive treatment approach is essential for protecting your home's water systems.

Chloramine in Leander's Water Supply

Chloramine enters Leander's water as a disinfectant added by the municipal treatment facility — a combination of chlorine and ammonia that provides longer-lasting bacterial protection than chlorine alone. Unlike chlorine, which dissipates relatively quickly, chloramine remains stable throughout the distribution system, maintaining its disinfecting power all the way to your tap but also creating unique challenges for homeowners.

At 25.2 GPG hardness, chloramine becomes significantly more problematic because the high mineral content accelerates the breakdown of rubber seals, gaskets, and plastic components in your plumbing system. Scale deposits from extreme hardness create rough surfaces where chloramine concentrates, leading to faster deterioration of appliance components and plumbing fixtures. Many Leander homeowners notice a distinctive "medicinal" or "band-aid" odor from their tap water, which is chloramine's signature smell becoming more noticeable as it interacts with mineral buildup.

Chloramine requires specialized removal methods — standard activated carbon filters that work on chlorine are ineffective against chloramine. Only catalytic carbon or extended-contact carbon systems can reliably remove chloramine from water. This means Leander residents dealing with both extreme hardness and chloramine need a two-stage treatment approach: ion exchange softening to remove minerals, plus catalytic carbon filtration to eliminate chloramine.

The EPA allows up to 4.0 mg/L of chloramine in drinking water, and Leander's levels typically remain well below this threshold. However, chloramine poses specific risks for fish tanks (it's toxic to aquatic life) and dialysis patients, and it can react with lead in older plumbing to increase lead leaching into drinking water. The SoftPro Elite HE softener alone does not remove chloramine — homeowners concerned about chloramine should consider pairing the softener with a whole-house catalytic carbon filter.

Sediment and Turbidity Issues

Sediment in Leander's water originates from aging distribution pipes, occasional main breaks, and natural particulate from the Canyon Lake surface water source. While sediment levels typically remain low, even small amounts of suspended particles become magnified problems when combined with 25.2 GPG water hardness.

Sediment particles provide nucleation sites where calcium and magnesium can rapidly crystallize and attach. At 25.2 GPG, every piece of sediment becomes a seed crystal for scale formation, accelerating mineral buildup throughout your plumbing system. This is why Leander homeowners often notice faster scale accumulation on faucet aerators, showerheads, and appliance filters compared to other hard-water cities with cleaner source water.

The real-world symptom Leander residents notice is faster clogging of appliance filters and screens. Dishwasher filters need cleaning every 2-3 weeks instead of monthly. Washing machine lint traps accumulate mineral-crusted particles that feel gritty to the touch. Coffee makers and ice makers require more frequent descaling because sediment accelerates the mineral accumulation process.

EPA turbidity standards require treated water to remain below 1 NTU (nephelometric turbidity unit), and Leander's water consistently meets this standard. However, even trace amounts of turbidity become problematic when minerals can attach to suspended particles. The SoftPro Elite HE's built-in sediment pre-filter specifically addresses this compound problem — capturing particulate before it reaches the ion exchange resin while preventing sediment from accelerating scale formation throughout your home.

4. Why Most Leander Homeowners Pick the Wrong Softener

The biggest mistake Leander homeowners make is shopping for water softeners the same way they'd shop for a refrigerator — comparing price tags without understanding that 25.2 GPG water demands commercial-grade performance from residential equipment. A "budget-friendly" 24,000-grain softener that works adequately in Austin's 8 GPG water will be overwhelmed and fail within months when facing Leander's extreme mineral load.

At 25.2 GPG, resin exhaustion happens three times faster than in moderately hard water. An undersized unit regenerates every 1-2 days, wastes enormous amounts of salt and water, and still allows hard water breakthrough during peak usage periods. The false economy of buying a smaller unit costs more in salt, water, and premature replacement than investing in properly sized equipment from the beginning.

Homeowner Mistake #2: Confusing Softeners with Filters

Many Leander residents assume a single "whole house water system" will address both the 25.2 GPG hardness and the chloramine simultaneously. This fundamental misunderstanding leads to expensive disappointment when homeowners discover that ion exchange softeners remove calcium and magnesium but do not remove chloramine disinfectants.

Softeners and filters use completely different technologies for completely different purposes. Ion exchange resin physically replaces calcium and magnesium ions with sodium ions — it cannot capture chloramine molecules. Leander residents dealing with both extremely hard water and chloramine concerns need a properly sequenced system: softening first to protect downstream filters from scale damage, then catalytic carbon filtration to remove chloramine.

Homeowner Mistake #3: Ignoring Grain Capacity Math

The grain capacity calculation becomes critical at 25.2 GPG because the math scales exponentially. Here's the formula every Leander homeowner needs to understand:

4 people × 75 gallons per day × 25.2 GPG = 7,560 grains removed daily

7,560 grains × 7 days = 52,920 grains weekly

Add 20% buffer for high-usage days = 63,504 grains needed weekly

This calculation reveals why a 32,000-grain softener — adequate for most Texas cities — is completely inadequate for Leander's water. The unit would need regeneration every 2-3 days, wasting salt and water while risking hard water breakthrough. A minimum 64,000-grain capacity is essential, with 80,000 grains being optimal for reliable performance.

Homeowner Mistake #4: Overlooking Salt Efficiency

At 25.2 GPG, regeneration frequency makes salt efficiency the difference between reasonable operating costs and budget-breaking monthly expenses. An inefficient softener uses 12-15 pounds of salt per regeneration cycle compared to 6-8 pounds for high-efficiency models. When regenerating twice weekly, this difference compounds to 312-364 extra pounds of salt annually — adding $125-150 to operating costs in Leander.

Over a 10-year lifespan, salt efficiency differences total $1,250-1,500 in additional operating costs, not including the time and effort of hauling twice as much salt. For Leander homeowners facing 25.2 GPG water, salt efficiency isn't a nice-to-have feature — it's an economic necessity that pays for itself within the first two years of operation.

5. The SoftPro Elite HE: Built for Leander's Water

After evaluating Leander's water hardness of 25.2 GPG and the presence of chloramine and sediment in the local supply, one system consistently rises to the top for Leander homeowners: the SoftPro Elite HE Water Softener. This isn't marketing hyperbole — it's the logical engineering solution to the specific challenges that Leander's extreme water conditions create.

True Salt-Based Ion Exchange Technology

Salt-free "conditioners" marketed to Texas homeowners are physically incapable of removing minerals from water — they only attempt to change calcium crystal structure, which fails completely at 25.2 GPG. The SoftPro Elite HE uses proven cation exchange resin that physically captures calcium and magnesium ions while releasing sodium ions in their place. This is the only technology that delivers genuinely soft water at Leander's extreme hardness level.

The distinction matters enormously at 25.2 GPG because partial solutions don't work. Template-assisted crystallization and electromagnetic conditioning may reduce scale formation in moderately hard water, but they cannot handle the mineral supersaturation that Leander residents face daily. Only complete ion removal prevents the devastating appliance damage and energy waste that 25.2 GPG water inflicts.

Demand-Initiated Regeneration (DIR) System

At 25.2 GPG, resin exhausts faster than in any other Central Texas city, making regeneration timing absolutely critical. Traditional time-clock softeners regenerate on fixed schedules regardless of actual water usage, leading to either wasteful over-regeneration or catastrophic under-regeneration that allows hard water breakthrough.

The SoftPro Elite HE's DIR system monitors actual water usage and remaining grain capacity, regenerating only when the resin is genuinely depleted. For Leander households, this prevents the hard water breakthrough that destroys appliances while eliminating the salt and water waste of unnecessary regeneration cycles. At 25.2 GPG consumption rates, DIR technology typically reduces salt usage by 30-40% compared to timer-based systems.

NSF/ANSI Standard 44 Certified Components

Certification verifies that every component meets rigorous performance and materials safety standards — critical for Leander residents already managing chloramine disinfectants in their water supply. NSF/ANSI Standard 44 testing confirms that the ion exchange process itself doesn't introduce contaminants while reliably removing calcium and magnesium to below 1 GPG.

For homeowners dealing with 25.2 GPG water, knowing that the softening process meets national safety standards provides essential peace of mind. The certification also validates the system's ability to consistently deliver soft water under high-demand conditions like those found in Leander homes.

Multiple Grain Capacity Options

The SoftPro Elite HE offers 32,000, 48,000, 64,000, and 80,000-grain capacities, allowing Leander homeowners to size their system precisely for 25.2 GPG water consumption. For a typical 4-person household consuming 300 gallons daily, the 80,000-grain model provides optimal performance with regeneration every 5-6 days.

Proper sizing prevents the operational problems that plague undersized systems in extreme hardness conditions. An 80,000-grain unit handling Leander's 25.2 GPG water operates in the sweet spot for salt efficiency, resin longevity, and reliable soft water delivery.

10-Year Comprehensive Warranty

At 25.2 GPG, ion exchange resin experiences the heaviest possible residential duty cycle, making warranty protection essential rather than optional. The SoftPro Elite HE's 10-year warranty covers the years when extreme hardness stress is most likely to reveal equipment weaknesses or premature wear.

The warranty provides Leander homeowners with protection during the decade when their investment must prove its value against the most challenging residential water conditions in Central Texas. This coverage demonstrates the manufacturer's confidence that the system can withstand Leander's punishing 25.2 GPG water for years without failure.

Integrated Sediment Pre-Filtration

The SoftPro Elite HE's self-cleaning sediment pre-filter captures particulate before it reaches the ion exchange resin, preventing the accelerated fouling that sediment causes in 25.2 GPG water. This isn't just equipment protection — it's essential for maintaining system performance when both sediment and extreme hardness are present simultaneously.

By removing sediment upstream of the resin tank, the pre-filter prevents particles from becoming nucleation sites for rapid scale formation. This integrated approach extends resin life and maintains regeneration efficiency in Leander's challenging water conditions.

For Leander households dealing with 25.2 GPG of water hardness and the compounding presence of chloramine and sediment, the SoftPro Elite HE is not a comfort upgrade — it is infrastructure protection for your home.

6. How to Size Your Softener for Leander

Proper sizing for 25.2 GPG water requires precise calculation because undersized equipment fails quickly under extreme mineral loads. Follow these steps to determine the correct grain capacity for your Leander household:

Step 1: Count household members (example: 4 people)

Step 2: Multiply by 75 gallons per person per day (4 × 75 = 300 gallons daily)

Step 3: Multiply household gallons × 25.2 GPG hardness (300 × 25.2 = 7,560 grains removed daily)

Step 4: Multiply by 7 days (7,560 × 7 = 52,920 grains removed weekly)

Step 5: Add 20% buffer for high-usage days (52,920 × 1.20 = 63,504 grains needed weekly)

Step 6: Match to SoftPro Elite HE capacity that exceeds your weekly demand

For this 4-person Leander household removing 63,504 grains weekly, the 80,000-grain SoftPro Elite HE provides optimal performance. The system will regenerate every 5-6 days, maximizing salt efficiency while preventing hard water breakthrough during peak usage periods.

Regenerating every 5-7 days represents the sweet spot for salt efficiency and resin longevity at 25.2 GPG. More frequent regeneration wastes salt and water, while less frequent regeneration risks resin fouling and hard water breakthrough that defeats the system's purpose.

7. Installation in Leander: What to Know

Leander does not require a licensed plumber for residential water softener installation, but the city's extreme 25.2 GPG hardness makes professional installation worth considering for optimal performance. The system must be installed after the main water shutoff valve but before the water heater to protect all downstream appliances and plumbing from mineral damage.

The installation location should allow easy access to the brine tank for salt additions, which occur more frequently at 25.2 GPG than in moderate hardness areas. A drain line is essential for regeneration discharge — the system expels mineral-laden brine every 5-6 days, requiring a proper drainage connection to prevent flooding or property damage.

Leander's municipal water pressure typically ranges from 45-65 PSI, which suits the SoftPro Elite HE's operating requirements perfectly. The system functions optimally between 20-80 PSI, so most Leander homes require no pressure modifications for proper installation.

At 25.2 GPG, salt type selection dramatically impacts system performance and maintenance requirements. Use only evaporated salt pellets — the highest purity salt available — to minimize brine tank residue and prevent the salt bridging that plagues systems operating under extreme hardness conditions. Solar crystals and rock salt contain impurities that accelerate brine tank fouling when regeneration occurs twice weekly.

Check salt levels every 2-3 weeks at 25.2 GPG consumption rates. The rapid regeneration schedule depletes salt faster than in moderate hardness cities, and running out of salt allows catastrophic hard water breakthrough that can damage appliances within days.

8. Maintenance Schedule for Leander Homeowners

Maintaining a water softener in 25.2 GPG conditions requires more frequent attention than systems operating in moderately hard water. The extreme mineral load accelerates wear and increases the risk of operational problems, making proactive maintenance essential for protecting your investment.

Monthly Tasks

Check salt level every 2-3 weeks (consumption is extremely high at 25.2 GPG). The system uses 6-8 pounds of salt per regeneration cycle, and regenerating every 5-6 days means consuming 50-65 pounds monthly. Running out of salt allows hard water breakthrough that can damage appliances within days.

Inspect for salt bridges — a hardened crust that forms above the water line and prevents proper brine formation. Salt bridging occurs more frequently in high-regeneration systems, and 25.2 GPG water creates conditions where bridges form faster than in moderate hardness areas.

Verify the bypass valve remains in the service position. Accidentally leaving the system in bypass mode exposes your entire home to 25.2 GPG water damage.

Quarterly Maintenance

Clean the brine tank every 3 months to prevent salt residue buildup that impairs regeneration efficiency. At 25.2 GPG regeneration frequency, impurities accumulate faster and can cause operational problems if not removed regularly.

Test post-softener water hardness with test strips to confirm output remains below 1 GPG. Any reading above 1 GPG indicates resin exhaustion, improper regeneration, or system malfunction requiring immediate attention.

Inspect the sediment pre-filter and clean if necessary. The combination of sediment and 25.2 GPG hardness accelerates filter loading, potentially reducing water flow and system performance.

Annual Service Requirements

Perform complete brine tank cleaning and sanitization to remove accumulated mineral deposits and organic growth. The frequent regeneration cycles at 25.2 GPG create conditions where thorough annual cleaning becomes essential for continued performance.

Conduct a resin bed performance evaluation. If post-softener hardness creeps above 1 GPG despite proper salt levels and regeneration, the resin may require cleaning or replacement due to fouling from extreme mineral exposure.

Audit regeneration cycles to ensure timing and salt dose remain optimal for current water usage patterns. Household water consumption changes over time, and 25.2 GPG water demands precise regeneration scheduling for efficient operation.

Five-Year System Assessment

Evaluate resin replacement needs based on output water quality and regeneration efficiency. At 25.2 GPG, ion exchange resin experiences accelerated wear compared to moderate hardness applications. Professional assessment after five years helps determine whether resin replacement would restore peak performance and efficiency.

Leander residents should establish baseline hardness readings before installation and retest 30 days after startup to confirm the system performs as expected in extreme hardness conditions.

9. Is Leander's water at 25.2 GPG dangerous to drink?

Leander's 25.2 GPG water hardness poses no direct health dangers — calcium and magnesium are essential minerals that your body needs. The EPA does not regulate water hardness as a health contaminant because hard water consumption may actually provide beneficial minerals to your diet. However, the extreme mineral concentration creates significant comfort and property damage issues that affect quality of life and home value.

10. Will a water softener remove chloramine from Leander's water?

No, the SoftPro Elite HE softener does not remove chloramine from Leander's municipal water supply. Ion exchange resin is designed specifically to capture calcium and magnesium ions — it cannot remove chloramine disinfectants. Leander residents concerned about chloramine taste, odor, or health effects need a separate catalytic carbon filter installed downstream of the softener for complete water treatment.

11. How much salt will I use per month in Leander at 25.2 GPG?

A properly sized SoftPro Elite HE system serving a 4-person Leander household will consume approximately 50-65 pounds of salt monthly. At 25.2 GPG, the system regenerates every 5-6 days using 6-8 pounds of salt per cycle. This translates to $15-20 monthly in salt costs using high-quality evaporated pellets — a fraction of the money saved by preventing appliance damage and energy waste.

12. Does Leander require a permit to install a water softener?

Leander does not require permits for residential water softener installation when performed on existing plumbing connections. However, any new plumbing work or electrical connections may require city permits and licensed contractor installation. Check with Leander's building department if your installation involves running new water lines or adding electrical circuits for the softener system.

13. Why does soft water feel slippery in the shower?

The slippery feeling occurs because your skin can finally feel clean without calcium coating. At 25.2 GPG, Leander's hard water deposits mineral film on your skin that prevents proper soap rinsing and creates a false sense of "squeaky clean." Soft water allows soap to rinse completely, leaving skin naturally smooth and properly hydrated — a sensation that feels slippery until you adjust to genuinely clean skin.

14. How quickly will I see results after installing a softener in Leander?

Results from treating 25.2 GPG water are immediate and dramatic. Within 24 hours, you'll notice improved soap lather and softer skin. Within one week, existing scale begins dissolving from faucets and showerheads. Within 30 days, your water heater efficiency improves measurably as scale deposits gradually dissolve. Complete system benefits — including appliance protection and energy savings — develop over 3-6 months as existing mineral deposits clear from your plumbing.

15. Can the SoftPro Elite HE handle Leander's water without additional filtration?

The SoftPro Elite HE will completely solve Leander's 25.2 GPG hardness problem and capture sediment through its integrated pre-filter. However, it does not remove chloramine disinfectants. Most Leander families find that eliminating the extreme hardness addresses their primary water quality concerns. Residents sensitive to chloramine taste or odor should consider adding a catalytic carbon filter for comprehensive treatment.

16. What happens if I choose a smaller grain capacity to save money?

Undersizing a softener in 25.2 GPG water guarantees failure and wastes money. A 32,000-grain unit would regenerate every 2-3 days, consuming excessive salt and water while risking hard water breakthrough during high-demand periods. The false economy costs more in operating expenses and appliance damage than investing in proper 64,000 or 80,000-grain capacity from the beginning.

17. How do I know when my softener needs professional service?

At 25.2 GPG, watch for these warning signs requiring immediate attention: post-softener water testing above 1 GPG hardness, salt bridging that reforms quickly after cleaning, reduced water pressure, or regeneration cycles occurring more than twice weekly. Any of these symptoms indicate system problems that need professional diagnosis to prevent equipment damage and restore proper soft water delivery to your Leander home.

Final Verdict for Leander

Leander's 25.2 GPG water hardness demands commercial-grade treatment performance from residential equipment — there's no room for compromise when dealing with extreme mineral concentrations that exceed EPA classification thresholds by 80%. The addition of chloramine and sediment compounds the hardness challenge in ways that require careful system selection and proper sizing to avoid costly failures.

The SoftPro Elite HE emerges as the clear choice for Leander homeowners because its demand-initiated regeneration prevents hard water breakthrough under extreme mineral loads, its 80,000-grain capacity handles 25.2 GPG consumption without constant regeneration, and its integrated sediment filtration addresses the particle acceleration of scale formation. These aren't luxury features — they're engineering necessities for surviving Leander's punishing water conditions.

Check current SoftPro Elite HE pricing and available grain capacities for a Leander household dealing with 25.2 GPG hardness. The investment protects appliances worth $8,000-12,000 while eliminating the $2,800 annual hard water tax that Leander residents pay in energy waste, soap consumption, and premature equipment replacement.

Like the limestone hills that surround Leander and create this mineral-rich water challenge, the SoftPro Elite HE is built to endure — transforming your home's most destructive utility into the soft, clean water that Central Texas families deserve.

[Meta description: Expert guide to water softeners for Leander, TX's extreme 25.2 GPG hardness with chloramine. SoftPro Elite HE sizing, installation, and maintenance for Texas homes.]