Brookfield Water Utility Water Company

The Brookfield Municipal Water Utility operates under the oversight of the Public Service Commission of Wisconsin and is monitored by the Wisconsin Department of Natural Resources. Locally, the Utility reports to the City of Brookfield Water and Sewer Board and Common Council.

Water quality is rigorously maintained through:

• Weekly bacteriological contamination testing throughout the distribution system
• Quarterly testing of water at each well before treatment
• Twice-weekly internal testing to measure chlorine, phosphate and iron oxide levels

The City of Brookfield examines your water for more than 100 different chemicals and compounds, including lead, copper, Volatile Organic Compounds (VOC's), Synthetic Organic Compounds (SOC's), pesticides and various organic substances. These comprehensive tests ensure your water quality remains high, delivering safe and adequate water flow for all your needs.

While several contaminants have been detected, most remain below safe drinking water standards, with exceptions noted below. Overall, our water remains safe for consumption.

The Bishops Woods well exceeded the Radium 226/228 MCL in 2017. Compliance with Radionuclide standards is based on average radium levels over 4 quarters. Currently, the City remains compliant with regulations while closely monitoring radium levels and working with the Wisconsin DNR regarding potential future treatment needs.

The City of Brookfield Water and Sewer Board typically meets on the 2nd Tuesday of each month. For meeting location and time information, please contact City Hall at 262-782-9650 or visit the City's website at www.ci.brookfield.wi.us.

1. Where does Brookfield Water Utility water come from?
   Brookfield Water Utility supplies groundwater to Brookfield, Wisconsin.
2. Does Brookfield Water Utility test its tap water?
   Yes. Like every public water system, Brookfield Water Utility must test its water under the federal Safe Drinking Water Act and publish an annual water quality report (Consumer Confidence Report). Ask the utility for the latest report or look for it on its website.
3. How do I contact Brookfield Water Utility?
   Call 262-796-6717 or visit 19700 Riverview Dr, Brookfield, WI 53045, or use the contact options on the utility’s website.
4. Does Brookfield Water Utility water contain lead?
   Water usually leaves the treatment plant without lead. Lead can enter tap water from older service lines, solder and brass fixtures inside homes, especially when water sits in the pipes. Run the tap before drinking if water has been sitting, and ask the utility about lead testing and service line records.
5. Is Brookfield Water Utility water hard?
   Hardness depends on the source and changes over time. The annual water quality report lists hardness, or you can test it at home. If it is above about 7 grains per gallon, a water softener sized to your measured hardness will stop scale and spotting.