Brushy Creek MUD Water Company

Williamson County, Texas tap water from Brushy Creek MUD Water Company

Water Utility · Williamson County, TX

How we built this page: from Brushy Creek MUD Water Company's public water system records (detected and not-detected contaminant lists), the federal limits in EPA's drinking water regulations and USGS hardness classes. Records were checked November 2026; the utility's latest annual report has the measured levels.

Brushy Creek MUD Water Company supplies surface water to about 20,814 people in Williamson County, Texas. Public records list 9 contaminants detected in its water; a detection is not the same as a violation. For billing or a copy of the annual report, contact the utility directly; for what to do about your own tap, start with a free Local Water Analysis Report.

Brushy Creek MUD Water Company at a Glance

Area served Williamson County, Texas
Population served 20,814
Water source Surface water
Phone NA
Address Brownsville, Texas
Contaminants detected 9 listed in public records

1. Where Does Williamson County Water Come From?

Brushy Creek MUD Water Company delivers surface water to homes and businesses in Williamson County, Texas. It serves about 20,814 people. Every public water system must test its water under the federal Safe Drinking Water Act and publish the results each year in a Consumer Confidence Report.

Read the full results in the Brushy Creek MUD Water Company annual water quality report, or see what EPA requires in every report on its Consumer Confidence Report page.

Signs of hard water on hair and skin (Williamson County)

2. What Has Brushy Creek MUD Water Company Detected in Its Water?

Public records list 9 contaminants detected in Brushy Creek MUD Water Company water. A detection means a test found it at any level. Most results sit below federal limits; the table explains the ones with a limit or a known fix.

Contaminant What it is Federal limit (EPA) What removes it at home
Total trihalomethanes (TTHMs) Disinfection byproducts that form when chlorine reacts with natural matter in the water EPA limit: 80 ppb (running annual average) A whole-house carbon filter
Haloacetic acids (HAA5) A second group of chlorine disinfection byproducts EPA limit: 60 ppb for the five combined A whole-house carbon filter
Chloroform and related trihalomethanes Individual disinfection byproducts counted inside the TTHM total Counted in the 80 ppb TTHM limit A whole-house carbon filter
Unregulated metals and chemicals Substances EPA monitors but has not set a federal limit for No federal limit Reverse osmosis at the kitchen tap
All 9 detected contaminants
  • Bromodichloromethane
  • Bromoform
  • Chlorate
  • Chloroform
  • Dibromochloromethane
  • Dichloroacetic acid
  • Total trihalomethanes (TTHMs)
  • Trichloroacetic acid
  • ...
Tested but not detected (166)
  • 1,1,1,2-Tetrachloroethane
  • 1,1,1-Trichloroethane
  • 1,1,2,2-Tetrachloroethane
  • 1,1,2-Trichloroethane
  • 1,1-Dichloroethane
  • 1,1-Dichloroethylene
  • 1,1-Dichloropropene
  • 1,2,3-Trichlorobenzene
  • 1,2,3-Trichloropropane
  • 1,2,4-Trichlorobenzene
  • 1,2,4-Trimethylbenzene
  • 1,2-Dibromo-3-chloropropane (DBCP)
  • 1,2-Dichloroethane
  • 1,2-Dichloropropane
  • 1,3,5-Trimethylbenzene
  • 1,3-Butadiene
  • 1,3-Dichloropropane
  • 1,4-Dioxane
  • 2,2-Dichloropropane
  • 2,3-Dichlorobiphenyl
  • 2,4,5-T
  • 2,4,5-TP (Silvex)
  • 2,4,5-Trichlorobiphenyl
  • 2,4-D
  • 2,4-DB
  • 2-Chlorobiphenyl
  • 2-Hexanone
  • 22'3'46-Pentachlorobiphenyl
  • 22'33'44'6-Heptachlorobiphenyl
  • 22'33'45'66'-Octachlorobiphenyl
  • 22'44'-Tetrachlorobiphenyl
  • 22'44'56'-Hexachlorobiphenyl
  • 3,5-Dichlorobenzoic acid
  • 3-Hydroxycarbofuran
  • Acenaphthene
  • Acenaphthylene
  • Acetone
  • Acifluorfen (Blazer)
  • Acrylonitrile
  • Alachlor (Lasso)
  • Aldicarb
  • Aldicarb sulfone
  • Aldicarb sulfoxide
  • Aldrin
  • alpha-Chlordane
  • Anthracene
  • Antimony
  • Asbestos
  • Baygon (Propoxur)
  • Bentazon (Basagran)
  • Benzene
  • Benzo[a]anthracene
  • Benzo[a]pyrene
  • Benzo[b]fluoranthene
  • Benzo[g,h,i]perylene
  • Benzo[k]fluoranthene
  • Beryllium
  • Bromacil
  • Bromobenzene
  • Bromochloromethane
  • Bromomethane
  • Butachlor
  • Butyl benzyl phthalate
  • Cadmium
  • Carbaryl
  • Carbofuran
  • Carbon tetrachloride
  • Chloramben
  • Chlordane
  • Chlorodifluoromethane
  • Chloroethane
  • Chloromethane
  • Chromium (hexavalent)
  • Chrysene
  • cis-1,2-Dichloroethylene
  • cis-1,3-Dichloropropene
  • Cobalt
  • Dalapon
  • Di(2-ethylhexyl) adipate
  • Di(2-ethylhexyl) phthalate
  • Di-n-butyl phthalate
  • Dibenz[a,h]anthracene
  • Dibromomethane
  • Dicamba
  • Dichlorodifluoromethane
  • Dichloromethane (methylene chloride)
  • Dichlorprop
  • Dieldrin
  • Diethyl phthalate
  • Dimethyl phthalate
  • Dinoseb
  • Endrin
  • Ethyl methacrylate
  • Ethylbenzene
  • Ethylene dibromide
  • Fluorene
  • gamma-Chlordane
  • Heptachlor
  • Heptachlor epoxide
  • Hexachlorobenzene (HCB)
  • Hexachlorobutadiene
  • Hexachlorocyclopentadiene
  • Indeno[1,2,3-cd]pyrene
  • Iodomethane
  • Isopropylbenzene
  • Lindane
  • m- & p-Xylene
  • m-Dichlorobenzene
  • m-Xylene
  • Mercury (inorganic)
  • Methiocarb
  • Methomyl
  • Methoxychlor
  • Methyl ethyl ketone
  • Methyl isobutyl ketone
  • Methyl methacrylate
  • Metolachlor
  • Metribuzin
  • Monochlorobenzene (chlorobenzene)
  • MTBE
  • n-Butylbenzene
  • n-Propylbenzene
  • Naphthalene
  • Nitrite
  • o-Chlorotoluene
  • o-Dichlorobenzene
  • o-Xylene
  • Oxamyl (Vydate)
  • p-Chlorotoluene
  • p-Dichlorobenzene
  • p-Isopropyltoluene
  • Pentachlorophenol
  • Perfluorobutane sulfonate (PFBS)
  • Perfluoroheptanoic acid (PFHPA)
  • Perfluorohexane sulfonate (PFHXS)
  • Perfluorononanoic acid (PFNA)
  • Perfluorooctane sulfonate (PFOS)
  • Perfluorooctanoic acid (PFOA)
  • Phenanthrene
  • Picloram
  • Polychlorinated biphenyls (PCBs)
  • Prometon
  • Propachlor
  • Pyrene
  • Quinclorac
  • Radium-228
  • sec-Butylbenzene
  • Silver
  • Simazine
  • Styrene
  • tert-Butylbenzene
  • Tetrachloroethylene (perchloroethylene)
  • Tetrahydrofuran
  • Thallium
  • Toluene
  • Toxaphene
  • trans-1,2-Dichloroethylene
  • trans-1,2-Dichloropropene
  • trans-1,3-Dichloropropene
  • trans-Nonachlor
  • Trichloroethylene
  • Trichlorofluoromethane
  • Trifluralin
  • Vinyl acetate
  • Vinyl chloride
  • Xylenes (total)
SoftPro Chlorine+ and fluoride filtration (Williamson County)

Best Water Treatment for Williamson County Tap Water

Top Pick · Hard WaterSoftPro™ Elite Smart HE (City)
★★★★★ (1,247)
4.6 out of 5 · 1,247 Loox reviews
  • 32K, 40K, 48K or 64K grain sizes
  • Uses about 60% less salt than a traditional softener
  • IAPMO/NSF certified control valve
From $1,367
SoftPro™ Elite Smart HE (City)
Best for: Homes with hard city water that want scale gone from fixtures, water heaters and appliances.
Shop the Elite Softener
Best for Chlorine & ByproductsSoftPro™ Chlorine+ Whole House Carbon Filter
★★★★★ (601)
4.6 out of 5 · 601 Loox reviews
  • Catalytic carbon for chlorine and chloramine
  • Cuts the disinfection byproducts (TTHMs, HAA5) they form
  • Treats every tap, shower and appliance
From $1,097
SoftPro™ Chlorine+ Whole House Carbon Filter
Best for: City water that smells or tastes like chlorine, or lists TTHMs and HAA5.
Shop the Chlorine+ Filter
Best for FluorideSoftPro™ Fluoride & Chlorine+ SUPER Filter
★★★★★ (426)
4.6 out of 5 · 426 Loox reviews
  • Bone char plus catalytic carbon
  • Reduces fluoride, chlorine and chloramine
  • Whole house, made for city water
From $1,267
SoftPro™ Fluoride & Chlorine+ SUPER Filter
Best for: City water with added fluoride, for homes that want it out of every tap.
Shop the SUPER Filter

Prices are the starting price for each system, checked November 2026. Free shipping within the USA on systems (excludes AK, HI and PR).

3. Is Williamson County Tap Water Safe to Drink?

Brushy Creek MUD Water Company water has to meet federal Safe Drinking Water Act limits, and the annual report says whether it did. Contaminants can still be present below those limits. Infants, pregnant women, older adults and people with weakened immune systems should ask a doctor about their drinking water.

Your own tap can differ from the utility average. Lead usually comes from older service lines and home plumbing, not the treatment plant. Run the tap before drinking if water has been sitting, and get a free Local Water Analysis Report for your address.

4. Is Williamson County Water Hard?

Hardness is calcium and magnesium, and it shows up as white crust on faucets, spots on glasses and scale in your water heater. By USGS classes, 61 to 120 mg/L (3.5 to 7 gpg) is moderately hard and over 180 mg/L (10.5 gpg) is very hard. Check the Brushy Creek MUD Water Company report for its hardness figure, or test at home with strips.

3 signs you've got hard water (Williamson County)

To stop scale, size a salt-based softener to your hardness and water use. The SoftPro Elite (32,000 to 64,000 grains) uses about 60% less salt than a traditional softener, and most owners install it themselves. Start with the sizing calculator.

Get Your Williamson County Water Report and Softener Size

Not sure what's in your water or what size you need? Enter your address for a free local water analysis report, and our sizing calculator matches a softener to your hardness and household.

Get my free water report

5. How to Treat Williamson County Tap Water

Pick treatment by contaminant: whole-house carbon for chlorine and byproducts, a softener for scale, and reverse osmosis at the kitchen sink for what you drink. Point-of-use pitchers help with taste but don't reach showers, laundry or appliances.

What you want to fix What works SoftPro option
Hard water scale and spots Salt-based ion exchange softener SoftPro Elite water softener
Chlorine taste, TTHMs and HAA5 Whole-house catalytic carbon Chlorine+ whole-house filter
Fluoride Bone char plus carbon Fluoride & Chlorine+ SUPER filter
Arsenic, nitrate, chromium-6, lead and PFAS in drinking water Reverse osmosis at the kitchen tap Reverse osmosis systems

6. What SoftPro Customers Say

SoftPro has 10,000+ reviews from more than 100,000 customers. Most install the system themselves, and every system comes with a 6-MONTH money-back guarantee with no restocking fee.

"No more ugly calcium deposits in bath/shower and around fixtures! I love all the advanced features around regeneration and less salt use, too!"

Jeffrey S., verified Loox review, May 2026

"The soft water is lovely. It has only had to regenerate twice in 30 days unlike my older unit... I like the display showing the usage, flow rate and remaining charge in gallons."

Michael C., verified Loox review, March 2026
Customer photo of their SoftPro Elite for City Water, from Dave Z.'s verified Loox review
"Video said 3 to 4 hours to install. It took only 1 hour and I added a faucet." Dave Z., verified Loox review, September 2021
SoftPro Elite water softener in a home kitchen

7. How to Contact Brushy Creek MUD Water Company

For billing, outages or a copy of the annual report, contact Brushy Creek MUD Water Company directly. You can call NA, visit Brownsville, Texas or go to the utility's website.

Frequently Asked Questions

How do I get a water report for my Williamson County address?

Use SoftPro's free Local Water Analysis Report, or ask the utility for its latest annual Consumer Confidence Report.

Know Your Williamson County Water. Then Pick Your System.

Get your free local water analysis report first, then match the treatment to what is actually in your water.

Get my free water report

Sources (checked November 2026)