Alexander County Water District

Taylorsville, North Carolina tap water from Alexander County Water District

Water Utility · Taylorsville, NC

How we built this page: from Alexander County Water District's public water system records (detected and not-detected contaminant lists), the federal limits in EPA's drinking water regulations and USGS hardness classes. Records were checked November 2026; the utility's latest annual report has the measured levels.

Want the whole picture for Taylorsville, including other local utilities? See the Taylorsville water quality report.

Alexander County Water District supplies purchased surface water to about 12,771 people in Taylorsville, North Carolina. Public records list 7 contaminants detected in its water; a detection is not the same as a violation. For billing or a copy of the annual report, contact the utility directly; for what to do about your own tap, start with a free Local Water Analysis Report.

Alexander County Water District at a Glance

Area served Taylorsville, North Carolina
Population served 12,771
Water source Purchased surface water
Phone 828-632-1007
Address 100 1st St SW, Taylorsville, NC 28681
Contaminants detected 7 listed in public records

1. Where Does Taylorsville Water Come From?

Alexander County Water District delivers purchased surface water to homes and businesses in Taylorsville, North Carolina. It serves about 12,771 people. Every public water system must test its water under the federal Safe Drinking Water Act and publish the results each year in a Consumer Confidence Report.

Read the full results in the Alexander County Water District annual water quality report, or see what EPA requires in every report on its Consumer Confidence Report page.

Signs of hard water on hair and skin (Taylorsville)

2. What Has Alexander County Water District Detected in Its Water?

Public records list 7 contaminants detected in Alexander County Water District water. A detection means a test found it at any level. Most results sit below federal limits; the table explains the ones with a limit or a known fix.

Contaminant What it is Federal limit (EPA) What removes it at home
Total trihalomethanes (TTHMs) Disinfection byproducts that form when chlorine reacts with natural matter in the water EPA limit: 80 ppb (running annual average) A whole-house carbon filter
Haloacetic acids (HAA5) A second group of chlorine disinfection byproducts EPA limit: 60 ppb for the five combined A whole-house carbon filter
Chloroform and related trihalomethanes Individual disinfection byproducts counted inside the TTHM total Counted in the 80 ppb TTHM limit A whole-house carbon filter
Chromium-6 (hexavalent chromium) A form of chromium from natural deposits and industry No separate federal limit; total chromium is limited to 100 ppb Reverse osmosis at the kitchen tap
Unregulated metals and chemicals Substances EPA monitors but has not set a federal limit for No federal limit Reverse osmosis at the kitchen tap
All 7 detected contaminants
  • Bromodichloromethane
  • Chloroform
  • Chromium (hexavalent)
  • Dichloroacetic acid
  • Total trihalomethanes (TTHMs)
  • Trichloroacetic acid
  • 1,4-Dioxane
Tested but not detected (28)
  • 1,1-Dichloroethane
  • 1,2,3-Trichloropropane
  • 1,3-Butadiene
  • 1,4-Dioxane
  • 17-beta-Estradiol
  • 4-Androstene-3,17-dione
  • Asbestos
  • Bromochloromethane
  • Bromoform
  • Bromomethane
  • Chlorodifluoromethane
  • Chloromethane
  • Cobalt
  • Dibromoacetic acid
  • Equilin
  • Estriol
  • Estrone
  • Ethinyl estradiol
  • Molybdenum
  • Monobromoacetic acid
  • Monochloroacetic acid
  • Perfluorobutane sulfonate (PFBS)
  • Perfluoroheptanoic acid (PFHPA)
  • Perfluorohexane sulfonate (PFHXS)
  • Perfluorononanoic acid (PFNA)
  • Perfluorooctane sulfonate (PFOS)
  • Perfluorooctanoic acid (PFOA)
  • Testosterone
SoftPro whole-house Chlorine+ and fluoride filter (Taylorsville)

Best Water Treatment for Taylorsville Tap Water

Top Pick · Hard WaterSoftPro™ Elite Smart HE (City)
★★★★★ (1,247)
4.6 out of 5 · 1,247 Loox reviews
  • 32K, 40K, 48K or 64K grain sizes
  • Uses about 60% less salt than a traditional softener
  • IAPMO/NSF certified control valve
From $1,367
SoftPro™ Elite Smart HE (City)
Best for: Homes with hard city water that want scale gone from fixtures, water heaters and appliances.
Shop the Elite Softener
Best for Chlorine & ByproductsSoftPro™ Chlorine+ Whole House Carbon Filter
★★★★★ (601)
4.6 out of 5 · 601 Loox reviews
  • Catalytic carbon for chlorine and chloramine
  • Cuts the disinfection byproducts (TTHMs, HAA5) they form
  • Treats every tap, shower and appliance
From $1,097
SoftPro™ Chlorine+ Whole House Carbon Filter
Best for: City water that smells or tastes like chlorine, or lists TTHMs and HAA5.
Shop the Chlorine+ Filter
Best for FluorideSoftPro™ Fluoride & Chlorine+ SUPER Filter
★★★★★ (426)
4.6 out of 5 · 426 Loox reviews
  • Bone char plus catalytic carbon
  • Reduces fluoride, chlorine and chloramine
  • Whole house, made for city water
From $1,267
SoftPro™ Fluoride & Chlorine+ SUPER Filter
Best for: City water with added fluoride, for homes that want it out of every tap.
Shop the SUPER Filter

Prices are the starting price for each system, checked November 2026. Free shipping within the USA on systems (excludes AK, HI and PR).

3. Is Taylorsville Tap Water Safe to Drink?

The Safe Drinking Water Act sets the legal limits for Alexander County Water District water, and the utility reports its results every year. Low levels of some contaminants can still be in water that passes. Families with babies, older relatives or anyone with a weak immune system may want to ask a doctor about extra filtering.

The report shows an average across the system, and homes vary. Pipes and fixtures in older houses can add metals like lead. Flush the tap when water has been standing, and run your address through the free Local Water Analysis Report.

4. Is Taylorsville Water Hard?

Hard water won't hurt you, but it costs money: scale builds up in water heaters, dishwashers and shower heads once hardness passes about 7 grains per gallon. The USGS calls 3.5 to 7 gpg (61 to 120 mg/L) moderately hard and anything over 10.5 gpg (180 mg/L) very hard. Check the Alexander County Water District report for its hardness figure, or test at home with strips.

Benefits of soft, filtered water (Taylorsville)

A salt-based ion exchange softener is the fix that actually removes hardness. The SoftPro Elite is sized at 32,000, 40,000, 48,000 or 64,000 grains and uses about 60% less salt than older softeners; enter your hardness and household size in the sizing calculator to choose.

Get Your Taylorsville Water Report and Softener Size

Not sure what's in your water or what size you need? Enter your address for a free local water analysis report, and our sizing calculator matches a softener to your hardness and household.

Get my free water report

5. How to Treat Taylorsville Tap Water

Pick treatment by contaminant: whole-house carbon for chlorine and byproducts, a softener for scale, and reverse osmosis at the kitchen sink for what you drink. Point-of-use pitchers help with taste but don't reach showers, laundry or appliances.

What you want to fix What works SoftPro option
Hard water scale and spots Salt-based ion exchange softener SoftPro Elite water softener
Chlorine taste, TTHMs and HAA5 Whole-house catalytic carbon Chlorine+ whole-house filter
Fluoride Bone char plus carbon Fluoride & Chlorine+ SUPER filter
Arsenic, nitrate, chromium-6, lead and PFAS in drinking water Reverse osmosis at the kitchen tap Reverse osmosis systems

6. What SoftPro Customers Say

SoftPro has 10,000+ reviews from more than 100,000 customers. Most install the system themselves, and every system comes with a 6-MONTH money-back guarantee with no restocking fee.

"The soft water is lovely. It has only had to regenerate twice in 30 days unlike my older unit... I like the display showing the usage, flow rate and remaining charge in gallons."

Michael C., verified Loox review, March 2026

"No more ugly calcium deposits in bath/shower and around fixtures! I love all the advanced features around regeneration and less salt use, too!"

Jeffrey S., verified Loox review, May 2026
Customer photo of their SoftPro Elite for City Water, from Dave Z.'s verified Loox review
"Video said 3 to 4 hours to install. It took only 1 hour and I added a faucet." Dave Z., verified Loox review, September 2021
SoftPro Chlorine+ whole-house carbon filter

7. How to Contact Alexander County Water District

For billing, outages or a copy of the annual report, contact Alexander County Water District directly. You can call 828-632-1007, visit 100 1st St SW, Taylorsville, NC 28681 or go to the utility's website.

Frequently Asked Questions

Where does Alexander County Water District water come from?

Alexander County Water District supplies purchased surface water to Taylorsville, North Carolina.

Does Alexander County Water District test its tap water?

Yes. Like every public water system, Alexander County Water District must test its water under the federal Safe Drinking Water Act and publish an annual water quality report (Consumer Confidence Report). Ask the utility for the latest report or look for it on its website.

Does Alexander County Water District water contain lead?

Water usually leaves the treatment plant without lead. Lead can enter tap water from older service lines, solder and brass fixtures inside homes, especially when water sits in the pipes. Run the tap before drinking if water has been sitting, and ask the utility about lead testing and service line records.

Is Alexander County Water District water hard?

Hardness depends on the source and changes over time. The annual water quality report lists hardness, or you can test it at home. If it is above about 7 grains per gallon, a water softener sized to your measured hardness will stop scale and spotting.

How do I get a water report for my Taylorsville address?

Use SoftPro's free Local Water Analysis Report, or ask the utility for its latest annual Consumer Confidence Report.

Know Your Taylorsville Water. Then Pick Your System.

Get your free local water analysis report first, then match the treatment to what is actually in your water.

Get my free water report

Sources (checked November 2026)