City of Casper Water Company

Central Wyoming Regional Water Program (CWRWS) regularly monitors constituents in your municipal water as required by Federal and State regulations. This table presents monitoring results from January 1st to December 31st, 2017.

As water flows across land or underground, it can collect various substances including microbes, inorganic and organic compounds, and radioactive materials. All water, including bottled water, reasonably contains at least minimal amounts of some substances. However, the presence of these substances doesn't necessarily indicate a health risk.

Water sources include rivers, lakes, streams, ponds, reservoirs, springs and wells. During its journey, water may dissolve naturally occurring minerals and sometimes radioactive materials, while also picking up substances from animal presence or human activities.

Your water may contain various substances including:

• Microbial contaminants from sewage treatment facilities, septic systems, agricultural operations, and wildlife
• Inorganic contaminants like salts and metals, occurring naturally or from urban runoff, wastewater discharges, oil/gas production, or farming
• Pesticides and herbicides from agriculture, urban stormwater runoff, and residential usage
• Organic chemical contaminants from industrial processes, gas stations, urban runoff, and septic systems
• Radioactive contaminants, either naturally occurring or resulting from resource extraction activities

To ensure tap water safety, the EPA establishes regulations limiting contaminant amounts in public water systems. Similarly, the FDA sets limits for contaminants in bottled water to provide equivalent protection.

Understanding water quality terms:

• Non-Detect (ND): Laboratory analysis indicates the constituent isn't detectable
• Parts per million (ppm): One part per million equals one minute in two years or one penny in $10,000
• Parts per billion (ppb): One part per billion equals one minute in 2,000 years or one penny in $10,000,000
• Nephelometric Turbidity Unit (NTU): Measures water clarity
• Maximum Contaminant Level (MCL): The highest allowable level of a contaminant in municipal water
• Maximum Contaminant Level Goal (MCLG): The contaminant level below which no known health risks exist

Central Wyoming Regional Water System continuously monitors your water according to federal and local regulations. The most recent testing period covers January through December 2017. For detailed information about contaminants and potential health effects, contact the EPA's Safe Drinking Water Hotline at 1-800-426-4791.

1. Where does City of Casper water come from?
   City of Casper supplies purchased surface water to Casper, Wyoming.
2. Does City of Casper test its tap water?
   Yes. Like every public water system, City of Casper must test its water under the federal Safe Drinking Water Act and publish an annual water quality report (Consumer Confidence Report). Ask the utility for the latest report or look for it on its website.
3. How do I contact City of Casper?
   Call 307-235-8400 or visit 200 N. David, Casper, WY 82601, or use the contact options on the utility’s website.
4. Does City of Casper water contain lead?
   Water usually leaves the treatment plant without lead. Lead can enter tap water from older service lines, solder and brass fixtures inside homes, especially when water sits in the pipes. Run the tap before drinking if water has been sitting, and ask the utility about lead testing and service line records.
5. Is City of Casper water hard?
   Hardness depends on the source and changes over time. The annual water quality report lists hardness, or you can test it at home. If it is above about 7 grains per gallon, a water softener sized to your measured hardness will stop scale and spotting.