
Water Utility · Puyallup, WA
How we built this page: from City of Puyallup Water Company's public water system records (detected and not-detected contaminant lists), the federal limits in EPA's drinking water regulations and USGS hardness classes. Records were checked November 2026; the utility's latest annual report has the measured levels.
Want the whole picture for Puyallup, including other local utilities? See the Puyallup water quality report.
City of Puyallup Water Company supplies purchased surface water to about 34,335 people in Puyallup, Washington. Public records list 7 contaminants detected in its water; a detection is not the same as a violation. For billing or a copy of the annual report, contact the utility directly; for what to do about your own tap, start with a free Local Water Analysis Report.
City of Puyallup Water Company at a Glance
| Area served | Puyallup, Washington |
|---|---|
| Population served | 34,335 |
| Water source | Purchased surface water |
| Phone | 253-841-4321 |
| Address | 333 S. Meridian, Puyallup, WA 98371 |
| Contaminants detected | 7 listed in public records |
1. Where Does Puyallup Water Come From?
City of Puyallup Water Company delivers purchased surface water to homes and businesses in Puyallup, Washington. It serves about 34,335 people. Every public water system must test its water under the federal Safe Drinking Water Act and publish the results each year in a Consumer Confidence Report.
Read the full results in the latest annual water quality report on the City of Puyallup Water Company website (the 2017 report we have on file), or see what EPA requires in every report on its Consumer Confidence Report page.

2. What Has City of Puyallup Water Company Detected in Its Water?
Public records list 7 contaminants detected in City of Puyallup Water Company water. A detection means a test found it at any level. Most results sit below federal limits; the table explains the ones with a limit or a known fix.
| Contaminant | What it is | Federal limit (EPA) | What removes it at home |
|---|---|---|---|
| Total trihalomethanes (TTHMs) | Disinfection byproducts that form when chlorine reacts with natural matter in the water | EPA limit: 80 ppb (running annual average) | A whole-house carbon filter |
| Haloacetic acids (HAA5) | A second group of chlorine disinfection byproducts | EPA limit: 60 ppb for the five combined | A whole-house carbon filter |
| Chloroform and related trihalomethanes | Individual disinfection byproducts counted inside the TTHM total | Counted in the 80 ppb TTHM limit | A whole-house carbon filter |
| Chromium-6 (hexavalent chromium) | A form of chromium from natural deposits and industry | No separate federal limit; total chromium is limited to 100 ppb | Reverse osmosis at the kitchen tap |
| Arsenic | A metal that occurs naturally in rock and soil | EPA limit: 10 ppb | Reverse osmosis at the kitchen tap |
| Iron and manganese | Metals from rock and soil that stain fixtures and laundry | EPA secondary (non-health) guideline: 0.3 ppm iron, 0.05 ppm manganese | An iron filter, or a softener for low levels |
All 7 detected contaminants
- Bromodichloromethane
- Chloroform
- Chromium (hexavalent)
- Total trihalomethanes (TTHMs)
- Trichloroacetic acid
- Arsenic
- Manganese
Tested but not detected (103)
- 1,1,1,2-Tetrachloroethane
- 1,1,1-Trichloroethane
- 1,1,2-Trichloroethane
- 1,1-Dichloroethane
- 1,1-Dichloroethylene
- 1,2,3-Trichloropropane
- 1,2,4-Trichlorobenzene
- 1,2,4-Trimethylbenzene
- 1,2-Dibromo-3-chloropropane (DBCP)
- 1,2-Dichloroethane
- 1,2-Dichloropropane
- 1,3,5-Trimethylbenzene
- 1,3-Butadiene
- 1,4-Dioxane
- 2,4,5-TP (Silvex)
- 2,4-D
- 2,4-DB
- 4-Nitrophenol
- Acifluorfen (Blazer)
- Alachlor (Lasso)
- Antimony
- Atrazine
- Barium
- Benzene
- Benzoic acid
- Benzo[a]pyrene
- Beryllium
- Bromacil
- Bromobenzene
- Bromochloromethane
- Bromomethane
- Butachlor
- Cadmium
- Carbon tetrachloride
- Chloramben
- Chlordane
- Chlorodifluoromethane
- Chloromethane
- cis-1,2-Dichloroethylene
- Cobalt
- Cyanide
- Dalapon
- DCPA di-acid degradate
- Di(2-ethylhexyl) adipate
- Di(2-ethylhexyl) phthalate
- Dibromoacetic acid
- Dicamba
- Dichlorodifluoromethane
- Dichloromethane (methylene chloride)
- Dieldrin
- Dinoseb
- Endrin
- Ethylbenzene
- Ethylene dibromide
- Fluorene
- Fluoride
- Heptachlor
- Heptachlor epoxide
- Hexachlorobenzene (HCB)
- Hexachlorocyclopentadiene
- Lindane
- m- & p-Xylene
- Mercury (inorganic)
- Methoxychlor
- Metolachlor
- Metribuzin
- Monobromoacetic acid
- Monochlorobenzene (chlorobenzene)
- n-Butylbenzene
- Naphthalene
- Nitrite
- o-Chlorotoluene
- o-Dichlorobenzene
- o-Xylene
- p-Dichlorobenzene
- p-Isopropyltoluene
- Pentachlorophenol
- Perfluorobutane sulfonate (PFBS)
- Perfluoroheptanoic acid (PFHPA)
- Perfluorohexane sulfonate (PFHXS)
- Perfluorononanoic acid (PFNA)
- Perfluorooctane sulfonate (PFOS)
- Perfluorooctanoic acid (PFOA)
- Picloram
- Polychlorinated biphenyls (PCBs)
- Propachlor
- Radium
- combined (-226 & -228)
- Radium-228
- sec-Butylbenzene
- Selenium
- Silver
- Simazine
- Styrene
- Tetrachloroethylene (perchloroethylene)
- Thallium
- Toluene
- Toxaphene
- trans-1,2-Dichloroethylene
- Trichloroethylene
- Trichlorofluoromethane
- Vinyl chloride
- Xylenes (total)

Best Water Treatment for Puyallup Tap Water
- 32K, 40K, 48K or 64K grain sizes
- Uses about 60% less salt than a traditional softener
- IAPMO/NSF certified control valve

- Catalytic carbon for chlorine and chloramine
- Cuts the disinfection byproducts (TTHMs, HAA5) they form
- Treats every tap, shower and appliance

- Bone char plus catalytic carbon
- Reduces fluoride, chlorine and chloramine
- Whole house, made for city water

Prices are the starting price for each system, checked November 2026. Free shipping within the USA on systems (excludes AK, HI and PR).
3. Is Puyallup Tap Water Safe to Drink?
City of Puyallup Water Company water has to meet federal Safe Drinking Water Act limits, and the annual report says whether it did. Contaminants can still be present below those limits. Infants, pregnant women, older adults and people with weakened immune systems should ask a doctor about their drinking water.
What comes out of your faucet isn't always what left the plant. Older pipes, solder and brass fixtures can add lead on the way. If water has sat in the pipes for hours, run it for a minute first, and check your address with a free Local Water Analysis Report.
4. Is Puyallup Water Hard?
Hard water won't hurt you, but it costs money: scale builds up in water heaters, dishwashers and shower heads once hardness passes about 7 grains per gallon. The USGS calls 3.5 to 7 gpg (61 to 120 mg/L) moderately hard and anything over 10.5 gpg (180 mg/L) very hard. Check the City of Puyallup Water Company report for its hardness figure, or test at home with strips.

If your water is hard, a salt-based softener sized to your measured hardness stops the scale. The SoftPro Elite comes in 32,000, 40,000, 48,000 and 64,000-grain sizes and uses about 60% less salt than a traditional softener. The sizing calculator picks the right size.
Get Your Puyallup Water Report and Softener Size
Not sure what's in your water or what size you need? Enter your address for a free local water analysis report, and our sizing calculator matches a softener to your hardness and household.
Get my free water report5. How to Treat Puyallup Tap Water
Pick treatment by contaminant: whole-house carbon for chlorine and byproducts, a softener for scale, and reverse osmosis at the kitchen sink for what you drink. Point-of-use pitchers help with taste but don't reach showers, laundry or appliances.
| What you want to fix | What works | SoftPro option |
|---|---|---|
| Hard water scale and spots | Salt-based ion exchange softener | SoftPro Elite water softener |
| Chlorine taste, TTHMs and HAA5 | Whole-house catalytic carbon | Chlorine+ whole-house filter |
| Fluoride | Bone char plus carbon | Fluoride & Chlorine+ SUPER filter |
| Arsenic, nitrate, chromium-6, lead and PFAS in drinking water | Reverse osmosis at the kitchen tap | Reverse osmosis systems |
6. What SoftPro Customers Say
SoftPro has 10,000+ reviews from more than 100,000 customers. Most install the system themselves, and every system comes with a 6-MONTH money-back guarantee with no restocking fee.
"No more ugly calcium deposits in bath/shower and around fixtures! I love all the advanced features around regeneration and less salt use, too!"
Jeffrey S., verified Loox review, May 2026"The soft water is lovely. It has only had to regenerate twice in 30 days unlike my older unit... I like the display showing the usage, flow rate and remaining charge in gallons."
Michael C., verified Loox review, March 2026

7. How to Contact City of Puyallup Water Company
For billing, outages or a copy of the annual report, contact City of Puyallup Water Company directly. You can call 253-841-4321, visit 333 S. Meridian, Puyallup, WA 98371 or go to the utility's website.
Frequently Asked Questions
How do I get a water report for my Puyallup address?
Use SoftPro's free Local Water Analysis Report, or ask the utility for its latest annual Consumer Confidence Report.
Know Your Puyallup Water. Then Pick Your System.
Get your free local water analysis report first, then match the treatment to what is actually in your water.
Get my free water reportSources (checked November 2026)
- Public water system records for the utilities listed on this page (detected and not-detected contaminant lists)
- EPA National Primary Drinking Water Regulations and Consumer Confidence Reports
- USGS: Hardness of Water
- SoftPro product pages for specs, prices and Loox review counts
Related guides
- Puyallup water quality report
- Highline Water District water utility
- Fruitland Mutual water utility
- North Perry Ave Water District water utility
- Skagit County Public Utility District 1 Judy Reservoir water utility
- Arsenic in tap water: health risks and fixes
- Nitrate in tap water: health risks and solutions