
Water Quality Report · Fort Worth, TX
How we built this report: from the public water system records for 1 utility serving Fort Worth, the federal limits in EPA's drinking water regulations and USGS hardness classes. We sell water treatment, so every claim about your water links to its public source. Records were checked November 2026; your utility's latest annual report has the measured levels.
Shopping for a softener? See our best water softener for Fort Worth guide.
Public water in Fort Worth, Texas must meet federal Safe Drinking Water Act limits. Public records list 8 contaminants detected in Fort Worth water, and a detection is not the same as a violation. The usual fixes are a softener for hard water, whole-house carbon for chlorine and its byproducts, and reverse osmosis for drinking water. Start with a free Local Water Analysis Report for your address.
1. Is Fort Worth Tap Water Safe to Drink?
The Safe Drinking Water Act sets the legal limits for Fort Worth tap water, and the utility reports its results every year. Low levels of some contaminants can still be in water that passes. Families with babies, older relatives or anyone with a weak immune system may want to ask a doctor about extra filtering.
Your own tap can differ from the utility average. Lead usually comes from older service lines and home plumbing, not the treatment plant. Run the tap before drinking if water has been sitting, and get a free Local Water Analysis Report for your address.

2. What's in Fort Worth Water?
Public water system records list 8 contaminants in Fort Worth water. Most detections sit below federal limits; the table explains the ones with a limit or a known fix.
| Contaminant | What it is | Federal limit (EPA) | What removes it at home |
|---|---|---|---|
| Total trihalomethanes (TTHMs) | Disinfection byproducts that form when chlorine reacts with natural matter in the water | EPA limit: 80 ppb (running annual average) | A whole-house carbon filter |
| Haloacetic acids (HAA5) | A second group of chlorine disinfection byproducts | EPA limit: 60 ppb for the five combined | A whole-house carbon filter |
| Chloroform and related trihalomethanes | Individual disinfection byproducts counted inside the TTHM total | Counted in the 80 ppb TTHM limit | A whole-house carbon filter |
| Chromium-6 (hexavalent chromium) | A form of chromium from natural deposits and industry | No separate federal limit; total chromium is limited to 100 ppb | Reverse osmosis at the kitchen tap |
| Arsenic | A metal that occurs naturally in rock and soil | EPA limit: 10 ppb | Reverse osmosis at the kitchen tap |
All 8 contaminants listed for Fort Worth
- Arsenic
- Bromate
- Bromodichloromethane
- Chloroform
- Chromium (hexavalent)
- Dibromochloromethane
- Dichloroacetic acid
- Total trihalomethanes (TTHMs)

Best Water Treatment for Fort Worth Tap Water
- 32K, 40K, 48K or 64K grain sizes
- Uses about 60% less salt than a traditional softener
- IAPMO/NSF certified control valve

- Catalytic carbon for chlorine and chloramine
- Cuts the disinfection byproducts (TTHMs, HAA5) they form
- Treats every tap, shower and appliance

- Bone char plus catalytic carbon
- Reduces fluoride, chlorine and chloramine
- Whole house, made for city water

Prices are the starting price for each system, checked November 2026. Free shipping within the USA on systems (excludes AK, HI and PR).
3. Where Does Fort Worth Water Come From?
Fort Worth is served by 1 public water system. Each tests its water and publishes the results once a year in a Consumer Confidence Report.
City of Fort Worth Water Company
Serves about 748,994 people with surface water.
8 contaminants detected in public records
4. Is Fort Worth Water Hard?
Hardness is calcium and magnesium, and it shows up as white crust on faucets, spots on glasses and scale in your water heater. By USGS classes, 61 to 120 mg/L (3.5 to 7 gpg) is moderately hard and over 180 mg/L (10.5 gpg) is very hard. Check the annual report for the hardness figure, or test at home with strips.

A salt-based ion exchange softener is the fix that actually removes hardness. The SoftPro Elite is sized at 32,000, 40,000, 48,000 or 64,000 grains and uses about 60% less salt than older softeners; enter your hardness and household size in the sizing calculator to choose. Our Fort Worth water softener guide covers local hardness and installation.
Get Your Fort Worth Water Report and Softener Size
Not sure what's in your water or what size you need? Enter your address for a free local water analysis report, and our sizing calculator matches a softener to your hardness and household.
Get my free water report5. How to Treat Fort Worth Tap Water
Pick treatment by contaminant: whole-house carbon for chlorine and byproducts, a softener for scale, and reverse osmosis at the kitchen sink for what you drink. Point-of-use pitchers help with taste but don't reach showers, laundry or appliances.
| What you want to fix | What works | SoftPro option |
|---|---|---|
| Hard water scale and spots | Salt-based ion exchange softener | SoftPro Elite water softener |
| Chlorine taste, TTHMs and HAA5 | Whole-house catalytic carbon | Chlorine+ whole-house filter |
| Fluoride | Bone char plus carbon | Fluoride & Chlorine+ SUPER filter |
| Arsenic, nitrate, chromium-6, lead and PFAS in drinking water | Reverse osmosis at the kitchen tap | Reverse osmosis systems |
6. What SoftPro Customers Say
SoftPro has 10,000+ reviews from more than 100,000 customers. Most install the system themselves, and every system comes with a 6-MONTH money-back guarantee with no restocking fee.
"The soft water is lovely. It has only had to regenerate twice in 30 days unlike my older unit... I like the display showing the usage, flow rate and remaining charge in gallons."
Michael C., verified Loox review, March 2026"No more ugly calcium deposits in bath/shower and around fixtures! I love all the advanced features around regeneration and less salt use, too!"
Jeffrey S., verified Loox review, May 2026

Frequently Asked Questions
Where does Fort Worth get its water?
From surface water, including the Trinity River system and Lake Worth. Lake and river water carries organic matter, which is why disinfection byproducts make up most of the list.
Is Fort Worth water hard?
No hardness figure is listed here; TDS is 277 ppm, which isn't the same thing. Check the city's annual report or test your tap before buying a softener.
Why does Fort Worth water taste or smell like chlorine?
The city disinfects the water to keep it safe from bacteria, and some disinfectant remains at the tap by design. A whole-house catalytic carbon filter removes the taste and smell.
Will a softener remove disinfection byproducts or arsenic?
No. A softener only removes hardness minerals. Use catalytic carbon for trihalomethanes and haloacetic acids, and reverse osmosis for arsenic, chromium-6, bromate and nitrate.
Is a fridge or pitcher filter enough?
They improve taste at one tap, but they don't treat showers, don't soften, and most aren't designed for arsenic or nitrate.
How do I get a water report for my Fort Worth address?
Use SoftPro's free Local Water Analysis Report, or ask your utility for its latest annual Consumer Confidence Report.
Know Your Fort Worth Water. Then Pick Your System.
Get your free local water analysis report first, then match the treatment to what is actually in your water.
Get my free water reportSources (checked November 2026)
- Public water system records for the utilities listed on this page (detected and not-detected contaminant lists)
- EPA National Primary Drinking Water Regulations and Consumer Confidence Reports
- USGS: Hardness of Water
- SoftPro product pages for specs, prices and Loox review counts