
Water Utility · Keene, NH
How we built this page: from Keene Water Department's public water system records (detected and not-detected contaminant lists), the federal limits in EPA's drinking water regulations and USGS hardness classes. Records were checked November 2026; the utility's latest annual report has the measured levels.
Want the whole picture for Keene, including other local utilities? See the Keene water quality report.
Keene Water Department supplies surface water to about 25,387 people in Keene, New Hampshire. Public records list 7 contaminants detected in its water; a detection is not the same as a violation. For billing or a copy of the annual report, contact the utility directly; for what to do about your own tap, start with a free Local Water Analysis Report.
Keene Water Department at a Glance
| Area served | Keene, New Hampshire |
|---|---|
| Population served | 25,387 |
| Water source | Surface water |
| Phone | 603-352-0133 |
| Address | 3 Washington Street, Keene, NH 3431 |
| Contaminants detected | 7 listed in public records |
1. Where Does Keene Water Come From?
Keene Water Department delivers surface water to homes and businesses in Keene, New Hampshire. It serves about 25,387 people. Every public water system must test its water under the federal Safe Drinking Water Act and publish the results each year in a Consumer Confidence Report.
Read the full results in the Keene Water Department annual water quality report, or see what EPA requires in every report on its Consumer Confidence Report page.

2. What Has Keene Water Department Detected in Its Water?
Public records list 7 contaminants detected in Keene Water Department water. A detection means a test found it at any level. Most results sit below federal limits; the table explains the ones with a limit or a known fix.
| Contaminant | What it is | Federal limit (EPA) | What removes it at home |
|---|---|---|---|
| Total trihalomethanes (TTHMs) | Disinfection byproducts that form when chlorine reacts with natural matter in the water | EPA limit: 80 ppb (running annual average) | A whole-house carbon filter |
| Chloroform and related trihalomethanes | Individual disinfection byproducts counted inside the TTHM total | Counted in the 80 ppb TTHM limit | A whole-house carbon filter |
| Chromium-6 (hexavalent chromium) | A form of chromium from natural deposits and industry | No separate federal limit; total chromium is limited to 100 ppb | Reverse osmosis at the kitchen tap |
| Fluoride | Added by many utilities for dental health, and found naturally in some sources | EPA limit: 4 ppm | A fluoride filter (bone char) |
| Barium | A metal from natural deposits and drilling waste | EPA limit: 2 ppm | A water softener or reverse osmosis |
| Iron and manganese | Metals from rock and soil that stain fixtures and laundry | EPA secondary (non-health) guideline: 0.3 ppm iron, 0.05 ppm manganese | An iron filter, or a softener for low levels |
All 7 detected contaminants
- Bromodichloromethane
- Chloroform
- Chromium (hexavalent)
- Total trihalomethanes (TTHMs)
- Barium
- Fluoride
- Manganese
Tested but not detected (172)
- 1,1,1,2-Tetrachloroethane
- 1,1,1-Trichloroethane
- 1,1,2,2-Tetrachloroethane
- 1,1,2-Trichloroethane
- 1,1-Dichloroethane
- 1,1-Dichloroethylene
- 1,1-Dichloropropene
- 1,2,3-Trichlorobenzene
- 1,2,3-Trichloropropane
- 1,2,3-trimethylbenzene (hemellitol)
- 1,2,4-Trichlorobenzene
- 1,2,4-Trimethylbenzene
- 1,2-Dibromo-3-chloropropane (DBCP)
- 1,2-Dichloroethane
- 1,2-Dichloropropane
- 1,3,5-Trichlorobenzene
- 1,3,5-Trimethylbenzene
- 1,3-Butadiene
- 1,3-Dichloropropane
- 1,4-Dioxane
- 2,2-Dichloropropane
- 2,4,5-TP (Silvex)
- 2,4-D
- 2-Hexanone
- 2-Methyl naphthalene
- 3-Hydroxycarbofuran
- Acenaphthene
- Acenaphthylene
- Acetone
- Acifluorfen (Blazer)
- Alachlor (Lasso)
- Aldicarb
- Aldicarb sulfone
- Aldicarb sulfoxide
- Aldrin
- Aluminum
- Anthracene
- Antimony
- Arsenic
- Asbestos
- Atrazine
- Baygon (Propoxur)
- Benzene
- Benzo[a]anthracene
- Benzo[a]pyrene
- Benzo[b]fluoranthene
- Benzo[g,h,i]perylene
- Benzo[k]fluoranthene
- Beryllium
- Bromobenzene
- Bromochloromethane
- Bromoform
- Bromomethane
- Butachlor
- Butyl benzyl phthalate
- Cadmium
- Carbaryl
- Carbofuran
- Carbon tetrachloride
- Chlordane
- Chlorodifluoromethane
- Chloroethane
- Chloromethane
- Chrysene
- cis-1,2-Dichloroethylene
- cis-1,3-Dichloropropene
- Cobalt
- Combined uranium
- Cyanide
- Dalapon
- Di(2-ethylhexyl) adipate
- Di(2-ethylhexyl) phthalate
- Di-n-butyl phthalate
- Dibenz[a,h]anthracene
- Dibromochloromethane
- Dibromomethane
- Dicamba
- Dichlorodifluoromethane
- Dichloromethane (methylene chloride)
- Dieldrin
- Diethyl phthalate
- Dimethyl phthalate
- Dinoseb
- Diquat
- Endothall
- Endrin
- Endrin aldehyde
- Ethyl ether
- Ethyl tert-butyl ether
- Ethylbenzene
- Ethylene dibromide
- Fluoranthene
- Fluorene
- gamma-Chlordane
- Glyphosate
- Heptachlor
- Heptachlor epoxide
- Hexachlorobenzene (HCB)
- Hexachlorobutadiene
- Hexachlorocyclopentadiene
- Hexachloroethane
- Indeno[1,2,3-cd]pyrene
- Isophorone
- Isopropyl alcohol
- Isopropyl ether
- Isopropylbenzene
- Lindane
- m- & p-Xylene
- m-Dichlorobenzene
- Mercury (inorganic)
- Methiocarb
- Methomyl
- Methoxychlor
- Methyl ethyl ketone
- Methyl isobutyl ketone
- Metolachlor
- Metribuzin
- Molybdenum
- Monochlorobenzene (chlorobenzene)
- MTBE
- n-Butylbenzene
- n-Propylbenzene
- Naphthalene
- Nitrite
- o-Chlorotoluene
- o-Dichlorobenzene
- o-Xylene
- Oxamyl (Vydate)
- p-Chlorotoluene
- p-Dichlorobenzene
- p-Isopropyltoluene
- Para-para DDE
- Para-para DDT
- Para-para DDT
- Pentachlorophenol
- Perfluorobutane sulfonate (PFBS)
- Perfluoroheptanoic acid (PFHPA)
- Perfluorohexane sulfonate (PFHXS)
- Perfluorononanoic acid (PFNA)
- Perfluorooctane sulfonate (PFOS)
- Perfluorooctanoic acid (PFOA)
- Phenanthrene
- Picloram
- Polychlorinated biphenyls (PCBs)
- Propachlor
- Pyrene
- Radium
- combined (-226 & -228)
- Radium-226
- Radium-228
- sec-Butylbenzene
- Selenium
- Silver
- Simazine
- Styrene
- tert-Amyl methyl ether
- tert-Butyl alcohol
- tert-Butylbenzene
- Tetrachloroethylene (perchloroethylene)
- Tetrahydrofuran
- Thallium
- Toluene
- Toxaphene
- trans-1,2-Dichloroethylene
- trans-1,3-Dichloropropene
- trans-Nonachlor
- Trichloroethylene
- Trichlorofluoromethane
- Trifluralin
- Vinyl acetate
- Vinyl chloride
- Xylenes (total)

Best Water Treatment for Keene Tap Water
- 32K, 40K, 48K or 64K grain sizes
- Uses about 60% less salt than a traditional softener
- IAPMO/NSF certified control valve

- Bone char plus catalytic carbon
- Reduces fluoride, chlorine and chloramine
- Whole house, made for city water

- Catalytic carbon for chlorine and chloramine
- Cuts the disinfection byproducts (TTHMs, HAA5) they form
- Treats every tap, shower and appliance

Prices are the starting price for each system, checked November 2026. Free shipping within the USA on systems (excludes AK, HI and PR).
3. Is Keene Tap Water Safe to Drink?
Keene Water Department water has to meet federal Safe Drinking Water Act limits, and the annual report says whether it did. Contaminants can still be present below those limits. Infants, pregnant women, older adults and people with weakened immune systems should ask a doctor about their drinking water.
The report shows an average across the system, and homes vary. Pipes and fixtures in older houses can add metals like lead. Flush the tap when water has been standing, and run your address through the free Local Water Analysis Report.
4. Is Keene Water Hard?
Hardness is calcium and magnesium, and it shows up as white crust on faucets, spots on glasses and scale in your water heater. By USGS classes, 61 to 120 mg/L (3.5 to 7 gpg) is moderately hard and over 180 mg/L (10.5 gpg) is very hard. Check the Keene Water Department report for its hardness figure, or test at home with strips.

If your water is hard, a salt-based softener sized to your measured hardness stops the scale. The SoftPro Elite comes in 32,000, 40,000, 48,000 and 64,000-grain sizes and uses about 60% less salt than a traditional softener. The sizing calculator picks the right size.
Get Your Keene Water Report and Softener Size
Not sure what's in your water or what size you need? Enter your address for a free local water analysis report, and our sizing calculator matches a softener to your hardness and household.
Get my free water report5. How to Treat Keene Tap Water
There's no single filter for everything, so start from the problem. Hardness needs a softener, chlorine and its byproducts need carbon, and dissolved metals and nitrate in drinking water need reverse osmosis. A pitcher or fridge filter covers one glass at a time, not the whole house.
| What you want to fix | What works | SoftPro option |
|---|---|---|
| Hard water scale and spots | Salt-based ion exchange softener | SoftPro Elite water softener |
| Chlorine taste, TTHMs and HAA5 | Whole-house catalytic carbon | Chlorine+ whole-house filter |
| Fluoride | Bone char plus carbon | Fluoride & Chlorine+ SUPER filter |
| Arsenic, nitrate, chromium-6, lead and PFAS in drinking water | Reverse osmosis at the kitchen tap | Reverse osmosis systems |
6. What SoftPro Customers Say
SoftPro has 10,000+ reviews from more than 100,000 customers. Most install the system themselves, and every system comes with a 6-MONTH money-back guarantee with no restocking fee.
"No more ugly calcium deposits in bath/shower and around fixtures! I love all the advanced features around regeneration and less salt use, too!"
Jeffrey S., verified Loox review, May 2026"The soft water is lovely. It has only had to regenerate twice in 30 days unlike my older unit... I like the display showing the usage, flow rate and remaining charge in gallons."
Michael C., verified Loox review, March 2026

7. How to Contact Keene Water Department
For billing, outages or a copy of the annual report, contact Keene Water Department directly. You can call 603-352-0133, visit 3 Washington Street, Keene, NH 3431 or go to the utility's website.
Frequently Asked Questions
Where does Keene Water Department water come from?
Keene Water Department supplies surface water to Keene, New Hampshire.
Does Keene Water Department test its tap water?
Yes. Like every public water system, Keene Water Department must test its water under the federal Safe Drinking Water Act and publish an annual water quality report (Consumer Confidence Report). Ask the utility for the latest report or look for it on its website.
Does Keene Water Department water contain lead?
Water usually leaves the treatment plant without lead. Lead can enter tap water from older service lines, solder and brass fixtures inside homes, especially when water sits in the pipes. Run the tap before drinking if water has been sitting, and ask the utility about lead testing and service line records.
Is Keene Water Department water hard?
Hardness depends on the source and changes over time. The annual water quality report lists hardness, or you can test it at home. If it is above about 7 grains per gallon, a water softener sized to your measured hardness will stop scale and spotting.
How do I get a water report for my Keene address?
Use SoftPro's free Local Water Analysis Report, or ask the utility for its latest annual Consumer Confidence Report.
Know Your Keene Water. Then Pick Your System.
Get your free local water analysis report first, then match the treatment to what is actually in your water.
Get my free water reportSources (checked November 2026)
- Public water system records for the utilities listed on this page (detected and not-detected contaminant lists)
- EPA National Primary Drinking Water Regulations and Consumer Confidence Reports
- USGS: Hardness of Water
- SoftPro product pages for specs, prices and Loox review counts