
Water Utility · Chesapeake, VA
How we built this page: from City of Chesapeake's public water system records (detected and not-detected contaminant lists), the federal limits in EPA's drinking water regulations and USGS hardness classes. Records were checked November 2026; the utility's latest annual report has the measured levels.
Want the whole picture for Chesapeake, including other local utilities? See the Chesapeake water quality report.
City of Chesapeake supplies surface water to about 112,790 people in Chesapeake, Virginia. Public records list 7 contaminants detected in its water; a detection is not the same as a violation. For billing or a copy of the annual report, contact the utility directly; for what to do about your own tap, start with a free Local Water Analysis Report.
City of Chesapeake at a Glance
| Area served | Chesapeake, Virginia |
|---|---|
| Population served | 112,790 |
| Water source | Surface water |
| Phone | 757-382-2489 |
| Address | 306 Cedar Road, Chesapeake, VA 23322 |
| Contaminants detected | 7 listed in public records |
1. Where Does Chesapeake Water Come From?
City of Chesapeake delivers surface water to homes and businesses in Chesapeake, Virginia. It serves about 112,790 people. Every public water system must test its water under the federal Safe Drinking Water Act and publish the results each year in a Consumer Confidence Report.
From the City of Chesapeake report
Chesapeake enjoys the advantage of two water treatment facilities and agreements to purchase treated municipal water from Norfolk and Portsmouth. Additional supply comes from well sources utilized during peak demand periods.
The Northwest Lake Water Treatment Plant processes up to 20 million gallons daily (MGD) from the Southwest River and brackish groundwater from four wells. This facility employs both conventional treatment methods (coagulation, sedimentation, filtration) and reverse osmosis (RO) membrane technology. This source typically serves customers south of Aide Road, though distribution may adjust based on consumption patterns.
Read the full results in the City of Chesapeake annual water quality report, or see what EPA requires in every report on its Consumer Confidence Report page.

2. What Has City of Chesapeake Detected in Its Water?
Public records list 7 contaminants detected in City of Chesapeake water. A detection means a test found it at any level. Most results sit below federal limits; the table explains the ones with a limit or a known fix.
| Contaminant | What it is | Federal limit (EPA) | What removes it at home |
|---|---|---|---|
| Total trihalomethanes (TTHMs) | Disinfection byproducts that form when chlorine reacts with natural matter in the water | EPA limit: 80 ppb (running annual average) | A whole-house carbon filter |
| Haloacetic acids (HAA5) | A second group of chlorine disinfection byproducts | EPA limit: 60 ppb for the five combined | A whole-house carbon filter |
| Chloroform and related trihalomethanes | Individual disinfection byproducts counted inside the TTHM total | Counted in the 80 ppb TTHM limit | A whole-house carbon filter |
| Chromium-6 (hexavalent chromium) | A form of chromium from natural deposits and industry | No separate federal limit; total chromium is limited to 100 ppb | Reverse osmosis at the kitchen tap |
| Unregulated metals and chemicals | Substances EPA monitors but has not set a federal limit for | No federal limit | Reverse osmosis at the kitchen tap |
All 7 detected contaminants
- Bromodichloromethane
- Chlorate
- Chloroform
- Chromium (hexavalent)
- Dibromochloromethane
- Dichloroacetic acid
- Total trihalomethanes (TTHMs)
Tested but not detected (63)
- 1,1,1-Trichloroethane
- 1,1,2-Trichloroethane
- 1,1-Dichloroethane
- 1,1-Dichloroethylene
- 1,2,3-Trichloropropane
- 1,2,4-Trichlorobenzene
- 1,2-Dibromo-3-chloropropane (DBCP)
- 1,2-Dichloroethane
- 1,2-Dichloropropane
- 1,3-Butadiene
- 1,4-Dioxane
- 17-beta-Estradiol
- 4-Androstene-3,17-dione
- Antimony
- Benzene
- Beryllium
- Bromochloromethane
- Bromoform
- Bromomethane
- Cadmium
- Carbon tetrachloride
- Chlorodifluoromethane
- Chloromethane
- Chromium (total)
- cis-1,2-Dichloroethylene
- Cobalt
- Cyanide
- Dibromoacetic acid
- Dichloromethane (methylene chloride)
- Equilin
- Estriol
- Estrone
- Ethinyl estradiol
- Ethylbenzene
- Ethylene dibromide
- Hydrogen sulfide
- Mercury (inorganic)
- Monobromoacetic acid
- Monochloroacetic acid
- Monochlorobenzene (chlorobenzene)
- MTBE
- Nitrite
- o-Dichlorobenzene
- p-Dichlorobenzene
- Perfluorobutane sulfonate (PFBS)
- Perfluoroheptanoic acid (PFHPA)
- Perfluorohexane sulfonate (PFHXS)
- Perfluorononanoic acid (PFNA)
- Perfluorooctane sulfonate (PFOS)
- Perfluorooctanoic acid (PFOA)
- Radium-228
- Selenium
- Silver
- Styrene
- Testosterone
- Tetrachloroethylene (perchloroethylene)
- Thallium
- Toluene
- trans-1,2-Dichloroethylene
- Trichloroethylene
- Vanadium
- Vinyl chloride
- Xylenes (total)

Best Water Treatment for Chesapeake Tap Water
- 32K, 40K, 48K or 64K grain sizes
- Uses about 60% less salt than a traditional softener
- IAPMO/NSF certified control valve

- Catalytic carbon for chlorine and chloramine
- Cuts the disinfection byproducts (TTHMs, HAA5) they form
- Treats every tap, shower and appliance

- Bone char plus catalytic carbon
- Reduces fluoride, chlorine and chloramine
- Whole house, made for city water

Prices are the starting price for each system, checked November 2026. Free shipping within the USA on systems (excludes AK, HI and PR).
3. Is Chesapeake Tap Water Safe to Drink?
City of Chesapeake water has to meet federal Safe Drinking Water Act limits, and the annual report says whether it did. Contaminants can still be present below those limits. Infants, pregnant women, older adults and people with weakened immune systems should ask a doctor about their drinking water.
The report shows an average across the system, and homes vary. Pipes and fixtures in older houses can add metals like lead. Flush the tap when water has been standing, and run your address through the free Local Water Analysis Report.
4. Is Chesapeake Water Hard?
Hard water won't hurt you, but it costs money: scale builds up in water heaters, dishwashers and shower heads once hardness passes about 7 grains per gallon. The USGS calls 3.5 to 7 gpg (61 to 120 mg/L) moderately hard and anything over 10.5 gpg (180 mg/L) very hard. Check the City of Chesapeake report for its hardness figure, or test at home with strips.

To stop scale, size a salt-based softener to your hardness and water use. The SoftPro Elite (32,000 to 64,000 grains) uses about 60% less salt than a traditional softener, and most owners install it themselves. Start with the sizing calculator.
Get Your Chesapeake Water Report and Softener Size
Not sure what's in your water or what size you need? Enter your address for a free local water analysis report, and our sizing calculator matches a softener to your hardness and household.
Get my free water report5. How to Treat Chesapeake Tap Water
Pick treatment by contaminant: whole-house carbon for chlorine and byproducts, a softener for scale, and reverse osmosis at the kitchen sink for what you drink. Point-of-use pitchers help with taste but don't reach showers, laundry or appliances.
| What you want to fix | What works | SoftPro option |
|---|---|---|
| Hard water scale and spots | Salt-based ion exchange softener | SoftPro Elite water softener |
| Chlorine taste, TTHMs and HAA5 | Whole-house catalytic carbon | Chlorine+ whole-house filter |
| Fluoride | Bone char plus carbon | Fluoride & Chlorine+ SUPER filter |
| Arsenic, nitrate, chromium-6, lead and PFAS in drinking water | Reverse osmosis at the kitchen tap | Reverse osmosis systems |
6. What SoftPro Customers Say
SoftPro has 10,000+ reviews from more than 100,000 customers. Most install the system themselves, and every system comes with a 6-MONTH money-back guarantee with no restocking fee.
"No more ugly calcium deposits in bath/shower and around fixtures! I love all the advanced features around regeneration and less salt use, too!"
Jeffrey S., verified Loox review, May 2026"The soft water is lovely. It has only had to regenerate twice in 30 days unlike my older unit... I like the display showing the usage, flow rate and remaining charge in gallons."
Michael C., verified Loox review, March 2026

7. How to Contact City of Chesapeake
For billing, outages or a copy of the annual report, contact City of Chesapeake directly. You can call 757-382-2489, visit 306 Cedar Road, Chesapeake, VA 23322 or go to the utility's website.
Frequently Asked Questions
How do I get a water report for my Chesapeake address?
Use SoftPro's free Local Water Analysis Report, or ask the utility for its latest annual Consumer Confidence Report.
Know Your Chesapeake Water. Then Pick Your System.
Get your free local water analysis report first, then match the treatment to what is actually in your water.
Get my free water reportSources (checked November 2026)
- Public water system records for the utilities listed on this page (detected and not-detected contaminant lists)
- EPA National Primary Drinking Water Regulations and Consumer Confidence Reports
- USGS: Hardness of Water
- SoftPro product pages for specs, prices and Loox review counts