
Water Utility · Kearns, UT
How we built this page: from Kearns Improvement District's public water system records (detected and not-detected contaminant lists), the federal limits in EPA's drinking water regulations and USGS hardness classes. Records were checked November 2026; the utility's latest annual report has the measured levels.
Kearns Improvement District supplies purchased surface water to about 51,187 people in Kearns, Utah. Public records list 8 contaminants detected in its water; a detection is not the same as a violation. For billing or a copy of the annual report, contact the utility directly; for what to do about your own tap, start with a free Local Water Analysis Report.
Kearns Improvement District at a Glance
| Area served | Kearns, Utah |
|---|---|
| Population served | 51,187 |
| Water source | Purchased surface water |
| Phone | 801-968-1011 |
| Address | 5350 West 5400 South, Kearns, UT 84118 |
| Contaminants detected | 8 listed in public records |
1. Where Does Kearns Water Come From?
Kearns Improvement District delivers purchased surface water to homes and businesses in Kearns, Utah. It serves about 51,187 people. Every public water system must test its water under the federal Safe Drinking Water Act and publish the results each year in a Consumer Confidence Report.
From the Kearns Improvement District report
Cross-connections in municipal water distribution systems pose a significant risk to water quality. A cross-connection occurs where water lines connect to equipment (like boilers), chemical-containing devices (such as air conditioning systems, fire sprinklers), or questionable water sources.
Read the full results in the Kearns Improvement District annual water quality report, or see what EPA requires in every report on its Consumer Confidence Report page.

2. What Has Kearns Improvement District Detected in Its Water?
Public records list 8 contaminants detected in Kearns Improvement District water. A detection means a test found it at any level. Most results sit below federal limits; the table explains the ones with a limit or a known fix.
| Contaminant | What it is | Federal limit (EPA) | What removes it at home |
|---|---|---|---|
| Total trihalomethanes (TTHMs) | Disinfection byproducts that form when chlorine reacts with natural matter in the water | EPA limit: 80 ppb (running annual average) | A whole-house carbon filter |
| Chromium-6 (hexavalent chromium) | A form of chromium from natural deposits and industry | No separate federal limit; total chromium is limited to 100 ppb | Reverse osmosis at the kitchen tap |
| Arsenic | A metal that occurs naturally in rock and soil | EPA limit: 10 ppb | Reverse osmosis at the kitchen tap |
| Nitrate | Mostly from fertilizer, septic systems and natural deposits | EPA limit: 10 ppm (as nitrogen) | Reverse osmosis at the kitchen tap |
| Fluoride | Added by many utilities for dental health, and found naturally in some sources | EPA limit: 4 ppm | A fluoride filter (bone char) |
| Barium | A metal from natural deposits and drilling waste | EPA limit: 2 ppm | A water softener or reverse osmosis |
| Iron and manganese | Metals from rock and soil that stain fixtures and laundry | EPA secondary (non-health) guideline: 0.3 ppm iron, 0.05 ppm manganese | An iron filter, or a softener for low levels |
All 8 detected contaminants
- Arsenic
- Chromium (hexavalent)
- Total trihalomethanes (TTHMs)
- Barium
- Fluoride
- Manganese
- Nitrate and nitrite
- Selenium
Tested but not detected (118)
- 1,1,1,2-Tetrachloroethane
- 1,1,1-Trichloroethane
- 1,1,2,2-Tetrachloroethane
- 1,1,2-Trichloroethane
- 1,1-Dichloroethane
- 1,1-Dichloroethylene
- 1,1-Dichloropropene
- 1,2,3-Trichlorobenzene
- 1,2,3-Trichloropropane
- 1,2,4-Trichlorobenzene
- 1,2,4-Trimethylbenzene
- 1,2-Dichloroethane
- 1,2-Dichloropropane
- 1,3,5-Trimethylbenzene
- 1,3-Butadiene
- 1,3-Dichloropropane
- 1,4-Dioxane
- 2,2-Dichloropropane
- 2,4,5-TP (Silvex)
- 2,4-D
- 3-Hydroxycarbofuran
- Alachlor (Lasso)
- Aldicarb
- Aldicarb sulfone
- Aldicarb sulfoxide
- alpha-Chlordane
- Aluminum
- Antimony
- Atrazine
- Benzene
- Benzo[a]pyrene
- Beryllium
- Bromobenzene
- Bromochloromethane
- Bromodichloromethane
- Bromoform
- Bromomethane
- Butachlor
- Cadmium
- Carbaryl
- Carbofuran
- Carbon tetrachloride
- Chlordane
- Chlorodifluoromethane
- Chloroethane
- Chloroform
- Chloromethane
- cis-1,2-Dichloroethylene
- cis-1,3-Dichloropropene
- Cobalt
- Cyanide
- Dalapon
- Di(2-ethylhexyl) adipate
- Di(2-ethylhexyl) phthalate
- Dibromochloromethane
- Dibromomethane
- Dicamba
- Dichlorodifluoromethane
- Dichloromethane (methylene chloride)
- Dieldrin
- Dinoseb
- Endrin
- Ethylbenzene
- gamma-Chlordane
- Heptachlor
- Heptachlor epoxide
- Hexachlorobenzene (HCB)
- Hexachlorobutadiene
- Hexachlorocyclopentadiene
- Isopropylbenzene
- Lindane
- m-Dichlorobenzene
- m-Xylene
- Mercury (inorganic)
- Methomyl
- Methoxychlor
- Metolachlor
- Metribuzin
- Monochlorobenzene (chlorobenzene)
- MTBE
- n-Butylbenzene
- N-Nitrosodi-N-propylamine
- n-Propylbenzene
- Naphthalene
- Nitrite
- o-Chlorotoluene
- o-Dichlorobenzene
- Oxamyl (Vydate)
- p-Chlorotoluene
- p-Dichlorobenzene
- p-Isopropyltoluene
- p-Xylene
- Pentachlorophenol
- Perfluorobutane sulfonate (PFBS)
- Perfluoroheptanoic acid (PFHPA)
- Perfluorohexane sulfonate (PFHXS)
- Perfluorononanoic acid (PFNA)
- Perfluorooctane sulfonate (PFOS)
- Perfluorooctanoic acid (PFOA)
- Picloram
- Polychlorinated biphenyls (PCBs)
- Propachlor
- sec-Butylbenzene
- Silver
- Simazine
- Styrene
- tert-Butylbenzene
- Tetrachloroethylene (perchloroethylene)
- Thallium
- Toluene
- Toxaphene
- trans-1,2-Dichloroethylene
- trans-1,3-Dichloropropene
- Trichloroethylene
- Trichlorofluoromethane
- Trichlorotrifluoroethane
- Vinyl chloride
- Xylenes (total)

Best Water Treatment for Kearns Tap Water
- 32K, 40K, 48K or 64K grain sizes
- Uses about 60% less salt than a traditional softener
- IAPMO/NSF certified control valve

- Bone char plus catalytic carbon
- Reduces fluoride, chlorine and chloramine
- Whole house, made for city water

- Catalytic carbon for chlorine and chloramine
- Cuts the disinfection byproducts (TTHMs, HAA5) they form
- Treats every tap, shower and appliance

Prices are the starting price for each system, checked November 2026. Free shipping within the USA on systems (excludes AK, HI and PR).
3. Is Kearns Tap Water Safe to Drink?
Federal law sets the limits Kearns Improvement District water has to meet, and each year's water quality report shows the results. Meeting a limit doesn't mean a contaminant is absent. If someone in your home is pregnant, very young, elderly or immune-compromised, ask a doctor whether to filter your drinking water.
What comes out of your faucet isn't always what left the plant. Older pipes, solder and brass fixtures can add lead on the way. If water has sat in the pipes for hours, run it for a minute first, and check your address with a free Local Water Analysis Report.
4. Is Kearns Water Hard?
Hardness is calcium and magnesium, and it shows up as white crust on faucets, spots on glasses and scale in your water heater. By USGS classes, 61 to 120 mg/L (3.5 to 7 gpg) is moderately hard and over 180 mg/L (10.5 gpg) is very hard. Check the Kearns Improvement District report for its hardness figure, or test at home with strips.

A salt-based ion exchange softener is the fix that actually removes hardness. The SoftPro Elite is sized at 32,000, 40,000, 48,000 or 64,000 grains and uses about 60% less salt than older softeners; enter your hardness and household size in the sizing calculator to choose.
Get Your Kearns Water Report and Softener Size
Not sure what's in your water or what size you need? Enter your address for a free local water analysis report, and our sizing calculator matches a softener to your hardness and household.
Get my free water report5. How to Treat Kearns Tap Water
Match the fix to what you want gone: a softener for hardness, carbon for chlorine taste and disinfection byproducts, and reverse osmosis for drinking water. Refrigerator and pitcher filters only treat the water you drink, not your shower, laundry or water heater.
| What you want to fix | What works | SoftPro option |
|---|---|---|
| Hard water scale and spots | Salt-based ion exchange softener | SoftPro Elite water softener |
| Chlorine taste, TTHMs and HAA5 | Whole-house catalytic carbon | Chlorine+ whole-house filter |
| Fluoride | Bone char plus carbon | Fluoride & Chlorine+ SUPER filter |
| Arsenic, nitrate, chromium-6, lead and PFAS in drinking water | Reverse osmosis at the kitchen tap | Reverse osmosis systems |
6. What SoftPro Customers Say
SoftPro has 10,000+ reviews from more than 100,000 customers. Most install the system themselves, and every system comes with a 6-MONTH money-back guarantee with no restocking fee.
"No more ugly calcium deposits in bath/shower and around fixtures! I love all the advanced features around regeneration and less salt use, too!"
Jeffrey S., verified Loox review, May 2026"The soft water is lovely. It has only had to regenerate twice in 30 days unlike my older unit... I like the display showing the usage, flow rate and remaining charge in gallons."
Michael C., verified Loox review, March 2026

7. How to Contact Kearns Improvement District
For billing, outages or a copy of the annual report, contact Kearns Improvement District directly. You can call 801-968-1011, visit 5350 West 5400 South, Kearns, UT 84118 or go to the utility's website.
Frequently Asked Questions
How do I get a water report for my Kearns address?
Use SoftPro's free Local Water Analysis Report, or ask the utility for its latest annual Consumer Confidence Report.
Know Your Kearns Water. Then Pick Your System.
Get your free local water analysis report first, then match the treatment to what is actually in your water.
Get my free water reportSources (checked November 2026)
- Public water system records for the utilities listed on this page (detected and not-detected contaminant lists)
- EPA National Primary Drinking Water Regulations and Consumer Confidence Reports
- USGS: Hardness of Water
- SoftPro product pages for specs, prices and Loox review counts