
Water Utility · Washington, UT
How we built this page: from Washington City Water Company's public water system records (detected and not-detected contaminant lists), the federal limits in EPA's drinking water regulations and USGS hardness classes. Records were checked November 2026; the utility's latest annual report has the measured levels.
Washington City Water Company supplies surface water to about 18,434 people in Washington, Utah. Public records list 5 contaminants detected in its water; a detection is not the same as a violation. For billing or a copy of the annual report, contact the utility directly; for what to do about your own tap, start with a free Local Water Analysis Report.
Washington City Water Company at a Glance
| Area served | Washington, Utah |
|---|---|
| Population served | 18,434 |
| Water source | Surface water |
| Phone | 435-656-6300 |
| Address | 111 North 100 East, Washington, UT 84780 |
| Contaminants detected | 5 listed in public records |
1. Where Does Washington Water Come From?
Washington City Water Company delivers surface water to homes and businesses in Washington, Utah. It serves about 18,434 people. Every public water system must test its water under the federal Safe Drinking Water Act and publish the results each year in a Consumer Confidence Report.
From the Washington City Water Company report
Washington City maintains a comprehensive Drinking Water Source Safety Plan available for public review. This document contains vital information about source protection zones, potential contamination risks, and management strategies implemented to safeguard our water supply.
Our water sources have been assessed as having low vulnerability to potential contaminants, though we've implemented additional protective measures to ensure continued safety. If you have questions about our resource protection strategies, please contact us.
Read the full results in the Washington City Water Company annual water quality report, or see what EPA requires in every report on its Consumer Confidence Report page.

2. What Has Washington City Water Company Detected in Its Water?
Public records list 5 contaminants detected in Washington City Water Company water. A detection means a test found it at any level. Most results sit below federal limits; the table explains the ones with a limit or a known fix.
| Contaminant | What it is | Federal limit (EPA) | What removes it at home |
|---|---|---|---|
| Chromium-6 (hexavalent chromium) | A form of chromium from natural deposits and industry | No separate federal limit; total chromium is limited to 100 ppb | Reverse osmosis at the kitchen tap |
| Nitrate | Mostly from fertilizer, septic systems and natural deposits | EPA limit: 10 ppm (as nitrogen) | Reverse osmosis at the kitchen tap |
| Unregulated metals and chemicals | Substances EPA monitors but has not set a federal limit for | No federal limit | Reverse osmosis at the kitchen tap |
All 5 detected contaminants
- Chromium (hexavalent)
- Chlorate
- Molybdenum
- Nitrate
- Strontium
Tested but not detected (15)
- 1,1-Dichloroethane
- 1,2,3-Trichloropropane
- 1,3-Butadiene
- 1,4-Dioxane
- Bromochloromethane
- Bromomethane
- Chlorodifluoromethane
- Chloromethane
- Cobalt
- Perfluorobutane sulfonate (PFBS)
- Perfluoroheptanoic acid (PFHPA)
- Perfluorohexane sulfonate (PFHXS)
- Perfluorononanoic acid (PFNA)
- Perfluorooctane sulfonate (PFOS)
- Perfluorooctanoic acid (PFOA)

Best Water Treatment for Washington Tap Water
- 32K, 40K, 48K or 64K grain sizes
- Uses about 60% less salt than a traditional softener
- IAPMO/NSF certified control valve

- Catalytic carbon for chlorine and chloramine
- Cuts the disinfection byproducts (TTHMs, HAA5) they form
- Treats every tap, shower and appliance

- Bone char plus catalytic carbon
- Reduces fluoride, chlorine and chloramine
- Whole house, made for city water

Prices are the starting price for each system, checked November 2026. Free shipping within the USA on systems (excludes AK, HI and PR).
3. Is Washington Tap Water Safe to Drink?
The Safe Drinking Water Act sets the legal limits for Washington City Water Company water, and the utility reports its results every year. Low levels of some contaminants can still be in water that passes. Families with babies, older relatives or anyone with a weak immune system may want to ask a doctor about extra filtering.
The report shows an average across the system, and homes vary. Pipes and fixtures in older houses can add metals like lead. Flush the tap when water has been standing, and run your address through the free Local Water Analysis Report.
4. Is Washington Water Hard?
Hard water won't hurt you, but it costs money: scale builds up in water heaters, dishwashers and shower heads once hardness passes about 7 grains per gallon. The USGS calls 3.5 to 7 gpg (61 to 120 mg/L) moderately hard and anything over 10.5 gpg (180 mg/L) very hard. Check the Washington City Water Company report for its hardness figure, or test at home with strips.

A salt-based ion exchange softener is the fix that actually removes hardness. The SoftPro Elite is sized at 32,000, 40,000, 48,000 or 64,000 grains and uses about 60% less salt than older softeners; enter your hardness and household size in the sizing calculator to choose.
Get Your Washington Water Report and Softener Size
Not sure what's in your water or what size you need? Enter your address for a free local water analysis report, and our sizing calculator matches a softener to your hardness and household.
Get my free water report5. How to Treat Washington Tap Water
There's no single filter for everything, so start from the problem. Hardness needs a softener, chlorine and its byproducts need carbon, and dissolved metals and nitrate in drinking water need reverse osmosis. A pitcher or fridge filter covers one glass at a time, not the whole house.
| What you want to fix | What works | SoftPro option |
|---|---|---|
| Hard water scale and spots | Salt-based ion exchange softener | SoftPro Elite water softener |
| Chlorine taste, TTHMs and HAA5 | Whole-house catalytic carbon | Chlorine+ whole-house filter |
| Fluoride | Bone char plus carbon | Fluoride & Chlorine+ SUPER filter |
| Arsenic, nitrate, chromium-6, lead and PFAS in drinking water | Reverse osmosis at the kitchen tap | Reverse osmosis systems |
6. What SoftPro Customers Say
SoftPro has 10,000+ reviews from more than 100,000 customers. Most install the system themselves, and every system comes with a 6-MONTH money-back guarantee with no restocking fee.
"No more ugly calcium deposits in bath/shower and around fixtures! I love all the advanced features around regeneration and less salt use, too!"
Jeffrey S., verified Loox review, May 2026"The soft water is lovely. It has only had to regenerate twice in 30 days unlike my older unit... I like the display showing the usage, flow rate and remaining charge in gallons."
Michael C., verified Loox review, March 2026

7. How to Contact Washington City Water Company
For billing, outages or a copy of the annual report, contact Washington City Water Company directly. You can call 435-656-6300, visit 111 North 100 East, Washington, UT 84780 or go to the utility's website.
Frequently Asked Questions
How do I get a water report for my Washington address?
Use SoftPro's free Local Water Analysis Report, or ask the utility for its latest annual Consumer Confidence Report.
Know Your Washington Water. Then Pick Your System.
Get your free local water analysis report first, then match the treatment to what is actually in your water.
Get my free water reportSources (checked November 2026)
- Public water system records for the utilities listed on this page (detected and not-detected contaminant lists)
- EPA National Primary Drinking Water Regulations and Consumer Confidence Reports
- USGS: Hardness of Water
- SoftPro product pages for specs, prices and Loox review counts